Tricolor gs 8306 receiver update. Tricolor TV - receiver software update

Not all satellite TV subscribers understand how to update Tricolor TV on their own. Meanwhile, this process can be extremely important for maintaining the quality of the equipment and watching your favorite channels. Without keeping the software up to date, you can suddenly lose the ability to watch TV and use the receiver for its intended purpose.

In addition, users must know where to look for information about the release of a new version of the software. Without this most useful information, it will be quite difficult to monitor the status of the set-top box.

It should also be taken into account the important fact that each receiver model, including the gs 8306, receives a separate update package, so the appearance of a new version for one device does not guarantee that there is firmware for another receiver brand.

Why update

The main reason for updating Tricolor receivers is to keep their software up to date, in working condition. This is necessary for the provider to be able to support the broadcast of all available channels connected by the user.

If the owner of the receiver refuses to install the latest released version of the software, it is likely that he will have difficulty watching individual TV channels and programs. This is especially true for broadcasts in Ultra HD, since they are the most demanding on the state of the receiver.

It should be emphasized that it is the disappearance of individual programs and channels that is one of the main factors signaling the need to think about the state of technology. Of course, if the difficulties are not caused by a banal failure in the operation of the set-top box. In this case, it is enough to reboot or reset the settings to the factory level.

Methods for updating the software of the Tricolor TV receiver

Faced with problems, it is worthwhile to figure out whether the Tricolor receiver really needs to be updated. To do this, you need to look at the current version of the software in the set-top box menu and compare it with the current one on the official portal of the satellite company. If the indicators differ, the equipment needs to be updated.

In 2020, there are 2 main ways to install firmware:

• by starting the process in automatic mode, using the transfer of the desired program from the satellite;
• by downloading the appropriate software yourself.

In the latter case, special care should be taken when deciding on the choice of a site with a program. Any mistake or careless action will lead to damage to the equipment. At the same time, it will be possible to restore its work only in service centers, that is, it will not be possible to do without additional serious costs.

How to update the Tricolor TV receiver GS 8306 in 2020

In order not to encounter malfunctions in the operation of Tricolor TV equipment, the software update should occur automatically. For this you will need:

1. turn off the power to the equipment and after a few seconds turn it on again;
2. switch to the information channel (by default, use the 0 button on the remote control, but sometimes the desired TV channel may turn out to be different);
3. wait for a message prompting you to download updates;
4. agree to the proposal by selecting the option "yes";
5. wait for the procedure to be completed without trying to influence what is happening and use the TV.

When the process ends, the equipment will turn off and on again. Just in case, users can check which version of the software they have installed.

It is important to remember that the procedure that has begun should never be interrupted. If it is stopped before its completion, the receiver will be faulty.

How to update the software on Tricolor TV yourself

When using a flash drive, it is most reasonable to use the Tricolor TV hardware software update instructions, which will be attached to the downloaded program. This is due to the existence of various features of this process that are available for different models of the receiver and modules. But, if the instructions could not be found, the firmware will run as follows:

1. the first step is to clarify which version of the software is the latest and find it on the Internet;
2. then you need to install the downloaded file on a USB flash drive;
3. the memory card will have to be inserted into the USB port of the set-top box;
4. then in the menu it remains to find the item offering to update the software and start the download;
5. after the procedure is completed, the equipment will automatically reboot.

Sometimes the installation starts on its own immediately after connecting the flash drive, in such situations you should not interfere in what is happening and monitor the continuity of the download.

Where to go in case of failure

It has already been mentioned above how important it is to carry out the process of downloading fresh software correctly. Any mistake or accidental deviation from the instructions can lead to serious problems that cannot be fixed without the help of a wizard.

That is why, if the user does not know which approach to choose, and doubts that he can handle it on his own, experiments should be immediately abandoned. They are fraught with serious troubles.

It is much wiser to immediately seek help from Tricolor TV specialists. Assistance in updating the software device will guarantee that the user will avoid mistakes and protect himself from overpaying for possible repairs. To use the services of a master, you should contact the nearest service center or call the company's support service and follow the recommendations and advice of consultants.

If it was not possible to avoid trouble, it remains to go to the repair shop. The address of the service center can be found on the official portal of the provider or when calling the hotline. You can also contact the dealer where you purchased the equipment for advice. But you should be prepared to spend. In most cases, breakdowns during the upgrade are not covered under warranty. This also applies to situations where the process was interrupted through no fault of the owners of the equipment (for example, a power outage).

Deterioration of signal quality, incorrect tuning of Tricolor TV channels may indicate that the receiver software version is outdated. To eliminate control errors, get rid of malfunctions and even expand the range of capabilities of the Tricolor TV GS-8306 receiver, you need to update the software. You can cope with this task without contacting a specialist, it will take about a third of an hour, a little knowledge on how to flash the equipment available at home, and its subsequent configuration.

Preparing for a software update

Before flashing the receiver, you need to make sure that the device is confidently receiving the signal. Due to the fact that the software will be installed directly via satellite, any technical failure can be fatal for the receiver. For the same reason, it is necessary to ensure uninterruptible power supply, otherwise it may not turn on at the next start.

If you are out of town in windy weather, a thunderstorm, or periodic power outages occur in a given period of time, then it is better not to risk it and postpone the procedure for a while.

How to reflash the receiver yourself

The firmware will take you about 20 minutes, but at this time you must not ignore the instructions and turn off the receiver or TV. The sequence of actions is as follows:

If there are doubts about one's own abilities, as well as fears that the set-top box may no longer turn on due to an interruption in the data download process, it is better to contact a service center.

The company's specialists can not only reflash the receiver, but also produce equipment diagnostics. In this case, it is worth knowing in advance about the cost of the services provided and the timing of their implementation.

What will the new firmware version change

The processes of information exchange and improvement of communication channels do not stand still. In order to improve picture quality and sound quality, developers are working tirelessly to create a new software environment. Although devices in users' homes will remain old, timely software updates can expand functionality and make the interface of the satellite set-top box more simple and convenient.

Do not forget that a new software version for the GS-8306 Tricolor TV model is scheduled for release in 2017. So, you can not miss the opportunity to have improved quality satellite television at home or in the country.

Opportunities will open before you:

• sorting films alphabetically, by genre and time of showing;
• reading descriptions of films and series that interested you;
• Set a timer to turn on selected browsing sessions.

Summing up

Now you know exactly how to update the software of your Tricolor GS-8006 receiver . Detailed instructions will certainly help to maintain the correct operation of the equipment throughout the entire service life and not spend money on the help of specialists. In addition, it becomes possible, without changing the device, to expand the functionality of the set-top box and change the interface, which with each new version becomes more intuitive, understandable and attractive.

To watch HDTV channels, " Tricolor» advises satellite receiver tricolor tv hd GS-8306. With the use of this satellite receiver it is possible to watch TV channels both in SD quality (standard definition) and HD quality (high definition television - HDTV) - "Maximum HD" package. This model supports a complete set of services required when watching channels of both standards. The satellite HD receiver can be connected to a variety of TVs and displays. In this short description, we will explain how to connect GS 8306 without resorting to the help of a professional.

You can always buy Tricolor TV set in Murmansk, or the receiver separately, get a free consultation in our office by calling the phones in Murmansk 750-335 or 236-335 . By purchasing Tricolor TV equipment, you have the opportunity to watch 10 channels in excellent quality on your LCD TV - HDTV (high definition format). More comprehensive information about the equipment "Tricolor TV Full HD" you have the opportunity to get on our website >>>.

In the equipment kit Tricolor TV HD- to watch HDTV channels - "Tricolor TV Full HD" together with the receiver, satellite dish and converter, the cost of a one-year subscription to the "Tricolor Maximum HD" package is included in addition, and after a year of viewing, the subscriber. the fee will be only 900 rubles. At the moment, the Tricolor Maximum HD package includes 25 channels in HD quality and more than 100 channels in SD quality, the packages are constantly updated with new TV channels.

At a glance at the receiver General Satellite GS-8306 we can note its modest dimensions. Its dimensions are only 250x180x44 mm. Rounded corners, a silver or black body, in this case the question arises: how can satellite TV be placed in this small but nice-looking device?

There are 5 buttons on the external panel of the GS-8306 satellite receiver: one power button and 2 each for switching TV and radio channels and changing the volume level, respectively, and in addition a functioning indicator. On the side there is a card reader slot. On the rear panel is an optimized configuration of connectors for connecting to audio / video equipment.

The rear panel of the GS 8306 consists of:

Input for connecting a coaxial cable from a satellite dish - LNB IN
- LNB OUT output (loop output), for connecting the next receiver in the chain
- RCA inputs and outputs ("bells")
- HDMI output is the latest digital media interface
- USB-port connector for flashing the satellite receiver
- Jack connector for connecting the power adapter

1st introduction happened. Let's connect!

The HD Tricolor TV set, which is necessary for watching HDTV channels, also includes a satellite dish and a circular polarization converter (LNB) for receiving a signal from the Eutelsat 36 A / B satellite. The dish must be tuned to the required satellite, for the central part of Russia, this is the Eutelsat 36 A / B 36 ° E satellite. d.

The satellite converter is connected to the input of the satellite HD receiver - LNB IN via a coaxial cable. In order to catch a high quality satellite signal, the coaxial cable must not be damaged and its length must not exceed 100 meters.

Now connect TV to receiver. This can be done either through RCA outputs (“tulips”), or using an HDMI cable. If you have a widescreen TV to watch HD channels on modern flat panel TVs, the best solution would be to connect the receiver with an HDMI cable.

Scanning TV channels

During the 1st power on of the HD GS 8306 Satellite Receiver or after resetting it to factory settings, the "First Installation Wizard" will start. The process of scanning TV channels consists of 3 easy steps:
Stage 1: you need to select the menu language: Russian, Ukrainian or English
Stage 2: choice of region
Stage 3: scanning tricolor tv channels. The setup wizard initializes this mode after specifying the region. Scanning TV channels takes no more than one minute, after which the satellite receiver switches to viewing mode. The numbering of TV and radio channels in the lists starts from the zero channel. The "zero" line in the TV list is occupied by "Infochannel Tricolor TV". Next are the HD channels of the "Maximum HD" package, then the channels of the "Basic" package, etc. At any time, you can set up a favorite list of tricolor TV channels, organizing them according to the groups you need!

Note! Installing a satellite dish will require the utmost discretion. In case of improper installation of a satellite dish, there may be malfunctions or equipment failure due to factors beyond the control of the equipment seller. In case you are not completely sure that you will be able to mount the equipment yourself.

You can always order from our company (tel.: 750335.236335) a service for installing and configuring a satellite dish both in Murmansk and in the Murmansk region.

HD Digital Satellite Receiver

IMPORTANT!!! The Stingray firmware for this receiver model with a weak processor is very unstable - possible problems:

• loss of picture and sound
• flickering when turning on electric devices and lights
• freezing and slow channel switching
• spontaneous reset to factory settings when the power is turned off
• loss of signal from the antenna

It will not be possible to restore the previous version of the software via USB. PS (Only by soldering flash memory and flashing it in the programmer)

Before updating, read the instructions in the archive.

Unofficial software:

Compared to previous software versions:

• The operator selection menu has been modernized.
• Implemented a new menu interface "Status", which simplifies the work with this menu.
• Improved overall receiver performance.
• An information block has appeared containing a description of the main methods of payment for Tricolor TV services.

According to the comments of the user vale9041 from the forum http://www.telesputnik.ru

Now it is possible to remember the settings of the receiver through the standby mode, even if it was disconnected from the power supply.

The procedure is as follows:

If you have just created favorites and turned off the receiver with the power cord, then turned it back on, the receiver will go to the tricolor channel, button return with two circular arrows (the so-called LAST ) we will be on the first channel created in the favorite.

If, when viewing a favorite, we transfer the receiver from the remote control to standby mode, then turn it on again, then later, when you disconnect the res from the network with a cord and turn it back on, the return button will return it to the favorites of the channel at which you switched it to standby mode from the remote. That is, the standby mode serves as a memorization.

The same can be done with the volume ... If you set the volume to the maximum, and transfer the res to standby mode, then the next time you turn on the res, the maximum volume will be. But this is on condition that you will later turn off the res with a cord from the outlet.

the same can be done so that the receiver remembers the general list of channels in one column or three columns in width (view)... that is, the standby mode is remembering what we want ...

Past releases

Compared to the previous version of the GS8306 receiver software / GS8305, version 1.0.49 has the following changes:

• The algorithm for automatic search of Tricolor TV channels has been improved.
• Removed the ability to delete the list of TV and radio channels that are generated by default in the "All TV" and "All Radio" lists.
• During the initial setup, the channel number "0" is displayed.
• Removed indication of pressing buttons in StandBy mode.
• When switching to the list of radio channels for the first time, the receiver is switched on on the radio channel number "0".
• Optimized EPG performance
• Implemented work with right polarization.
• TV Mail Service. The Delete Mail button has been renamed to Delete Mail.
• Channel list. The "Width" function button has been renamed to "View".
• Fixed incorrect inscription in HDMI mode "Volume scale timeout". In version 1.0.049, the inscription looks like: "Time to display the volume scale."
• Confirmation dialog boxes are implemented from left to right ("YES" -- "NO", default cursor is "NO").
• Improved the work of the service "Cinema halls "Tricolor TV"
• Improved receiver compatibility with TVs when connected to them via HDMI

Receiver firmware via USB service port

GS-8306 does not have an RS-232 (COM) port, but it has a service USB, through which it is flashed. For firmware, we need a regular USB flash drive, and the latest version of the firmware file for the GS-8306 receiver can be downloaded higher .

You can check which version of the receiver software you have installed in the Main Menu

DRE Info>Status

Firmware order:

1. File ssu_gsc_stb.upg copy to USB flash without renaming.

2. Insert USB flash into the receiver and reboot the receiver by power, you can do this by pressing the button "stand by" on the front panel of the receiver. As soon as the power is turned on, the firmware process will begin, this will be indicated by a corresponding message on the TV screen.

Now it remains only to wait for the end of the process. When the firmware is finished, a message about the successful firmware will appear on the TV screen.

3. After the permission message to remove the USB flash appears on the TV screen, remove the USB flash.

IMPORTANT! It is not recommended to remove the USB flash drive before the appropriate permission message appears on the TV screen, otherwise the receiver will fail.

A rollback to an earlier version is not possible; in the receiver, you can replace the software with either the current version or a newer one.

If the firmware does not go, then:

We format the flash drive in FAT or FAT32 with any utility, for example from HP for flash drives, but not in Windows, such as right-clicking on the flash drive and the format may not help.

We upload the file to a flash drive.

We insert it into the included receiver, wait a minute as little as possible and turn it off with the button on the device, you can immediately turn it on with the same button.

After 10 seconds, maximum 30, an inscription will appear that the firmware is in progress.

If the inscription does not appear and the standby indicator starts to flicker, then the firmware has not started.

Software update for GS 8305 and GS 8306 receivers via satellite

On March 11, 2013, a software update for the GS8305 and GS8306 receivers will be launched from the Eutelsat W4/W7 (36A/36B) satellites, aimed at improving and improving the performance of this receiving equipment. Tricolor TV subscribers will be able to update the receiver software at any time from March 11 to April 8, 2013.

Before starting the update, write down the current software version by going to "Menu" -> « DRE Info" -> "Status". When the update is completed, the receiver software version should change to 1.1.001 . The new software will be downloaded from the air.

ATTENTION! Do not turn off the power of the receiver until the end of the update procedure! Otherwise, the receiver may be damaged!

To update the receiver software, follow these steps:

1. Unplug the receiver's power cord from the outlet, and then plug the receiver back into the mains.

2. Switch the receiver to the TV channel "Infochannel" Tricolor TV ".

3. After a few seconds, a message will appear on the screen asking you to update the receiver software in the following form:

When this message appears, select "YES" and press the "OK" button on the remote control.

Attention! If a message about the need to update the software does not appear on the TV screen within 5 minutes, you need to reset the receiver to the factory settings (“Menu” - “Settings” - “Factory settings” - “OK”).

4. After agreeing to update, service messages about the process of updating the receiver software will begin to be displayed on the screen. The message type is shown below. The software update takes about five minutes.

Attention! Do not turn off the power of the receiver during the software update! Otherwise, the receiver may be damaged!

5. Upon completion of the software update, the receiver will reboot and turn on in the “Setup Wizard” mode.

6. At the first step of the Setup Wizard, you will be prompted to select the language of the menu and the operator. You must select "Tricolor TV Center", only after that you can proceed to the next step.

7. After finishing the search for Tricolor TV TV and radio channels, you need to make sure that the receiver software version has changed to 1.1.001 . To do this, go to « Menu» -> « DREInfo" -> "Status" and check the value in the third line. If the receiver software version has not changed, you need to turn off and turn on the receiver on the Tricolor TV Infochannel and repeat the update procedure.

8. This completes the receiver and module software update, your receiver is ready for further work.

You can watch a training video about updating the software on the air of the Teleinstructor training channel and in the Video Instructions section on the Tricolor TV website.

Description of the new software version:

The new software is designed to increase the level of security of receiving equipment and ensure the stability of its operation, as well as to make its operation more convenient when watching TV channels and using additional Tricolor TV services.

A new functionality has been added to the software in the interface of the "Tricolor TV Cinema Halls" package. Some buttons have received additional functions, for example, pressing the Red button brings up a description of the selected movie, Green - options for sorting the list of films (alphabetically, by genre, by nearest screenings, by novelty in the schedule), Yellow - a list of films for which it was installed timer, Blue - a list of films that will be available for viewing the next time the repertoire is updated.

For the convenience of subscribers, the Status menu has been redesigned. After the update, the subscriber will have two options for displaying information:

Brief (contains the most frequently used data, including information about the ID number) - is displayed when you go to the "Status" menu item;

Extended (contains all information about the receiver) - called by pressing the Red button ("F1" or "i") on the remote control while in the "Status" menu.

Frequently asked Questions:

Question: Why do I need to update the software?

Answer: The new software version for the GS8305 and GS8306 receivers has a new, more convenient interface for the Tricolor TV Cinemas package, the Status menu has been redesigned, and changes have been made to the system settings of the receiver, which increases its stability.

Question: Why did the Status information window look different? Where did some of the items that were before go?

Answer: For the convenience of subscribers, the Status menu has been redesigned. Now you have two options for displaying information: short (contains the most frequently used data, including information about the ID number) and extended (contains all information about the receiver).

Question: Why have the functional buttons changed in the interface of the "Tricolor TV Cinema Halls" package?

Answer: In the new version of the software, additional features of the interface of the package “Cinema halls “Tricolor TV” were implemented. Now, by pressing the Red button, you can read the description of the selected movie, the Green button - select one of the possible options for sorting the list of films (alphabetically, by genre, by the nearest screenings, by novelty in the schedule), the Yellow one - to see the list of films for which it was installed timer, Blue - see the list of films that will be available for viewing the next time the repertoire of the Tricolor TV Cinemas package is updated. Also, the new version of the software implements the ability to display the interface of the “Tricolor TV Cinema Halls” package on the screen when you click on the “Order Movie” or “Split File” button when watching / listening to any TV or radio channel, and not just, as it was before , when watching the TV channel "TV.Poisk".

It is difficult to imagine modern residents without the Internet, mobile communications and, of course, satellite television. Since digital TV is quite in demand today, a large number of companies provide such a service. However, quality is important to Russians, so they prefer Tricolor TV. It is this provider of digital television broadcasting that has the largest viewership.

By becoming a subscriber of Tricolor TV, residents of Russia get access to many channels on a wide variety of topics. The operator has taken care to provide relevant content to both adults and children. For example, the "Children's" package will appeal to any kid, and parents will not miss the opportunity to enjoy bright and interesting cartoons, fairy tales, educational programs. Sports fans and lovers of erotica will also be satisfied - there are channels of this genre for them.

Activation of the "Single" service is an opportunity to watch more than 200 TV channels of a musical, informational, entertainment nature, as well as all kinds of films, series and much more.

However, it is worth remembering that by connecting the package, it is necessary to renew its validity in a timely manner. Only in this way will you have access to all channels included in the service. It is easy to do this - you just need to choose a convenient payment method. And Tricolor TV has plenty of them. How to pay for Tricolor?

First of all, specify the ID of the receiving equipment, because without it it will not be possible to make a payment. This number can be found in the "Status" section (select from the menu).

And now more about payment methods:

• Credit card holders can pay for Tricolor with a bank card(the card must belong to the partner bank of the TV provider)
• You can pay for the package at any postal and banking branch of Russia (the bank must cooperate with the operator)
• On sale there are special payment cards - scratch cards. It is enough to enter a certain code and the service will be extended
• One of the ways is electronic payment systems - Yandex.Money, WebMoney, QIWI, etc. That is, it is possible Tricolor payment via the Internet. You will need to have the required amount on your e-wallet (some systems charge a fee - keep this in mind)
• Today, many subscribers use Internet banking to deposit money ( Tricolor payment online) - it's fast, convenient and you don't need to leave your home
• Almost every small shop, not to mention supermarkets, etc., has payment terminals. We find the appropriate section, enter the necessary information and deposit cash
• You can pay for Tricolor TV packages at Euroset, Svyaznoy and other communication stores
• You can transfer the required amount from your mobile phone account

It should not be forgotten that when Tricolor payment, personal account also good for this. Each subscriber has his own account with funds (optional). If the required amount is available, then you can use this method.

If you want to always have access to all channels included in the connected service, do not forget to renew it in time. Otherwise, at one point you will not be able to watch your favorite shows or movies.