Will the 5000 receivers turn off the tricolor. Freebie and digital TV

Video encoding technology has become one of the most promising for implementation as a mass broadcast. In Russia, this process was launched back in 2007-2008, through the phased introduction of multiplexes - packages of TV channels, which are available through the receiver. The so-called first and second program blocks, according to the law, are publicly available, which does not cause resistance in their broadcasting from market operators due to the lack of commercial benefits. The massive reduction of this package of channels (on "legal" grounds by one of the industry leaders) led to the fact that subscribers began to look for everything available ways how to watch Tricolor TV for free. The company has more than 50% of the audience that such measures will hit hard.

What is available to the client?

As already mentioned, at the state level, a list of two multiplexes (a total of 20 channels) has been approved, which all digital television operators are required to broadcast without restrictions (encoding). In fact, the subscriber on a general basis has access to only 8 channels (information, promo, TV-TV, TV2-TV). The rest become available only on condition of an annual subscription to one of the existing service packages (Single, Single Multi, Children, etc.). Such a pleasure will cost 1200-4600 rubles. per year, that is, about 100-380 rubles. per month, which is another unpleasant surprise from the market monopolist. Moreover, the company's policy is such that previous merits and long years of cooperation with the operator are not taken into account, and the subscriber is immediately disconnected if the bill is not paid.

Search for a freebie

Watching channels both for free and for money is possible only if you have a receiver / set-top box. It receives a digital signal, and the built-in or complete module (CI +, CAM) is engaged in its decoding. Therefore, the root cause of the problems and possible ways to solve them must be sought in these two components.

On the this moment there are several options for action, liberal or not quite in relation to the operator himself.

Exchange receiver for a new one. This approach is massively practiced by the company itself, as the only true one. The fact is that pirates periodically break into the protection of receivers, leaving the operator out of work. The latter, in turn, adopts new models, offering customers to exchange old ones with an additional charge or at cost, continuing to view on the same terms. Thus, a network of pirated equipment is excluded and an additional source of income appears for the operator himself.

Exchange of the receiver for a third-party. In fact, this means giving up the services of the company and moving to another with the replacement of equipment. If you arm yourself with statistics, it becomes clear that the other five largest digital market operators together barely reach the market share that the leader covers. Accordingly, to expand the audience, they can offer much more interesting and flexible terms of cooperation.

Pirated software. Most of the company's clients are not at all averse to implementing free view favorite channels. In this case, the Internet becomes the first helper, where you can find various user / pirated plugins, the installation of which removes restrictions.

Cardsharing. This term hides in itself a certain compilation of free and official approaches. The fact is that one receiver is designed for one TV, and if there are several of them in the house, then you will have to fork out for several receivers. An alternative is the OSCam emulator, which allows you to spread the view over several points.

flashing. Another option would be to use third-party cards, such as GoldWafer. They are great for receivers like Dreambox, emulating official cards. Among the obvious advantages of this approach are the lack of constant updates and watching TV channels on tuners without emulation. The only downside is the rather high price.

Using the official offers of the operator or organizing free viewing by not quite legal methods is a purely personal decision of each subscriber, which, last but not least, depends on the family and corporate budget.

At first they lured, and now they milk mostly pensioners to the fullest. And who are they after that. Article +. There would be more of them with more detailed diagrams.

I am a pensioner, I have been using the tricolor for 5 months, and I pay in full. there are no discounts for such a case and I constantly see either there is no signal, or some errors and you have to wait 8 hours for the image to appear. Maybe enough to milk pensioners?

The impudence is limitless. I paid for an annual Tricolor subscription through Euroset. Looked 3 months and disconnected. Balance 0. Began to understand. Interestingly, both Euroset and Tricolor shout with one voice that there was no payment. I ask, how did I watch for 3 months? In the tricolor they answered that there was a program failure. Is this a worldwide conspiracy? I was disappointed in the tricolor (I write specially with small letters)

The tricolor was a huge disappointment. The subscription time has not expired, and I have already been disconnected. The operator insists by force: buy another receiver from us, yours is outdated !!! I realized that these crooks are making money by replacing receivers ... A plate was left on the wall for the “memory” of these crooks ...

The operator is not bad. But damn, how many good channels were thrown out of the package. There’s nothing to watch.

Yes, this tricolor got everyone! The most annoying thing is that everyone complains, and few refuse it. If the people were understanding, the tricolor would have become free for a long time. Or almost free. Give up everything from this Mr., and everyone will be happy!

For pensioners, you ask a question about doiki pensioners on the Kremlin, Putin, and also get a fig. In fact, block all free channels in the channel editor, as the command to disable comes from them the zero channel basically. To block in the settings, create a PIN. At the very beginning of the procedure, remove the wire from the receiver, reset the settings to factory settings. Further as written above. And watch TV more often so that the activation keys do not disappear. In general, we have a madhouse everywhere, not only with satellite.

Why?

I think that everyone is already aware that Tricolor TV is a place for freebies ... free opportunity watch almost all channels.

And so ... the topic is relevant and therefore I have collected all the possibilities about this topic. Let's start with a plugin that solves a lot of questions...

First option…

Actions…

WE INSTALL AS A USUAL PLUG THROUGH A FLASH DRIVE. Before installation, you need to stop all plugins.
Uploading the attached file keydata to the keys folder and run the plugin.
AND ENJOY VIEWING THE TRICOLOR PACKAGE (HD CHANNELS DO NOT WORK)

plugin.rar .... pick up:

keydata.rar .... pick up:

Path for keys \plugin\var\tuxbox\config
e36.bin or e56.bin

However… Tricolor TV now works on oscam and vicard, but every day you need to change the keys for them….

The second option...

Tricolor without an access card? Does it happen?

Yes, sometimes …
First you need to install the emulator oscam(if it has not been installed before). To emulate DRE (Tricolor) encoding, a special version of the oscam emulator has been developed.

Here is the assembly of the oscam, It updates the keys itself.
plugin.zip…. pick up:
Install from flash drive. After reboot, install DRE, then run au off au again au, and only then oscamdre on .... fresh keys.

Specifically on this topic...

Third option

Gold Wafer Cards…(Very good for Dreambox)

The card contains a peak controller chip such as PIC16F84 and an EEPROM memory chip such as 24C16.
In fact, they are exactly the same cards.

A firmware for this card appeared in the public, which emulates the official tricolor card of the 13th series.

It opens the same as the oscam_dre emulator, but the card has AU (auto-update), i.e. no need to update the ee.bin key file every week.

In addition, the card can be used in those tuners that do not have an emulator.

- (not official!) - This software is developed on the basis of the official 3.4.369 (the one that will pour from the satellite 07.10.13.) The main difference of this firmware is that advertising banners are not shown when switching channels. Works stably.

Features of this firmware:

2 - the submenu search for tricolor-tv channels has been removed from the main menu (but it is still available in the menu >> settings >> automatic search>> search type >> tricolor tv) or during initial installation (factory reset)

3 - when you enter the main menu or the game menu, the picture does not disappear!

4 - the ruffles on the side were removed in the main thing (in my opinion it was not harmonious :))

5 - exit from the channel list is organized by double pressing the ok button (exactly the same as it is organized in 99% of all tuners)

6 - when you press the game button, the swastika flaunted the search for tricolor channels now, as it should be, the swastika of the game :)

7 - the algorithm of the EPG menu has been changed - now it is much more convenient (everything can be done with just one button ok)

8 - in the Tetris menu, the ok and up buttons were swapped

9 - possible, but not guaranteed! the cause of hangups of receivers with modules of the 11th series has been eliminated.

10 - the actual channels on 10/05/2013 have already been collected in the firmware, all garbage has been removed !!!

Past releases

The procedure is quite simple and does not require special skills from subscribers, you just need to follow the instructions for replacing the software from the info channel. The update process takes some time and you need to be patient and wait for the end. But despite all the warnings, some users do not wait for the end of the software update process and as a result the receiver stops working.

Practice shows that in very rare cases, even after waiting for the software update to finish, the receiver may not turn on after a reboot. There is only one diagnosis - a failure to update the software.

But do not despair. This can be fixed by yourself and at home if you have a computer or another similar working receiver at hand. How to do this is described below. Helps in 99% of cases of unsuccessful software updates from the satellite.

Software update from a computer.

1. We purchase / solder ourselves null modem cable

2. Disconnect the receiver and computer from the network.

3. Connect the RS232 input of the receiver to the COM port on the computer.

4. Turn on the computer.

5., unpack and install the program

6. and unpack the required receiver firmware:

7. Run the program (the shortcut should appear on the desktop).

The following window will appear.

8. Click the Open File button and select the downloaded file with the firmware in the window that opens, after unzipping it.

9. Click on the Upload button, turn on the receiver in the network and turn on the Power button on the back of the receiver.

10. The progress bar of the File uploading process will begin to show the % and time until the end of the software upload process.

In this case, the letter L (Load - loading) and% of the process will be displayed on the digital display of the receiver.

11. After that, the progress bar of the Burning process will begin to show% and the time until the end of the burning process (firmware) of the software.

In this case, the letter b (burn - burning) and% of the process will be displayed on the digital display of the receiver.

12. The software update process is completed. Turn off the receiver and computer. Disconnect the null modem cable.

Record ID: 35 does not exist!

Software update from the receiver (for example, DRE 5000).

For DRE 4000, DRE 5001, DRE 7300 the process is similar.

1. We purchase / solder ourselvesnull modem cable.
2. Disconnect the receivers from the network.
3. A working receiver must be connected to the TV. The problem receiver is not connected to the TV.
4. We connect both receivers with a null-modem cable.

The picture above shows a working receiver. Below is the problem receiver.
4-2. Turn on the working receiver.
4-3. We enter the menu, select the item Settings.

5. Enter PIN. The default is 0000 (four zeros).

6. In the Settings menu, select Data transfer.

7. A window will appear:

Press the blue button on the remote control.
8. Two scales appear. And the Data Processing bar will start to fill up.

9. When the Data Processing jackal reaches 100%, an inscription appears:

10. Turn on the non-working receiver - turn it on and turn on the Power behind the receiver.
11. The filling of the lower scale has begun.

On the indicators of the receivers, the progress of the process of transferring / downloading data will be displayed in% (on the display, the symbol L - Load, loading, on the lower receiver, 5 - transfer, on the upper one).

12. After that, the TV will display:

Receivers do not turn off! The process of writing the firmware to the firmware (faulty) receiver begins. In this case, the process indication will NOT occur on the TV screen. The indication process is visible on the scoreboard of the receiver being flashed (on the scoreboard, the symbol b - burn, burn, on the lower receiver).

13. We are waiting for the indicator to reach 100% on the receiver being flashed. After the firmware receiver will reboot and the display will show the following:

14. The firmware process is completed. Remote control to the question “Data transfer completed. Repeat?" choose "NO". Turn off the receivers and disconnect the null modem cable.

If you're looking to purchase a dre 5000 receiver, you'll be interested in knowing as much as you can about it. Our article will provide you with the information you need.

The Tricolor receiver of the dre 5000 model is in particular demand among the operator's subscribers. The set-top box has support for dre conditional access with the ability to work on the network of this operator. It is fully customizable for Tricolor, this ensures maximum ease of its direct use.

Unlike its predecessor, the 4000, the dre 5000 has a redesigned cabinet. Due to this, it looks as attractive as possible, and this fact significantly distinguishes it from the background of many other consoles.

The dre 5000 satellite receiver received a 7-segment and 4-digit display. It displays all the main parameters of the operation of this device and can be easily controlled by the set-top box.

That is, the Tricolor TV receiver of the dre 5000 model has the best combination of price and quality and can provide full operation.

Additional features dre 5000 and 7300

A very attractive price is provided for the Tricolor dre 5000 receiver.
It will cost you much less than all possible analogues, and this will be a significant advantage of the purchase. When purchased from the operator itself, the price is completely reduced to very small values, because the company makes discounts to its subscribers.

Some other features of the presented model:

• The device can receive a signal in DVB-S/QSPK.
• Can be used with motorized antennas.
• The memory of the device is designed for 5000 channels.
• Sufficiently powerful processor and full signal processing.
• The indicator of the channel number you are currently on.

But there is a similar receiver called dre 7300. Another device number speaks of originality, but in fact the 7300 is completely identical to its brother. It is produced in the same factory, according to the same scheme. The 7300 does not have any differences, so it should not be considered a separate device.

The set-top box has a wide range of control options and can be configured for each specific TV. The menu and interface are completely made in Russian, and you will not have any problems with management.

Sharing consoles

Naturally, many were interested in sharing the dre 5000. This procedure is very popular among users and provides many opportunities. As a result of hacking, you do not need to buy access from the operator itself, and this will be a significant plus for the owner.

What gives sharing:

• You get full access to all channels, and you don't have to shell out huge amounts for a subscription.
• You can watch different TV packages.
• The number of available programs is increasing significantly.

The procedure is carried out by gaining access to a specialized server. But remember that it is far from free, and you will have to pay a certain amount for access to the service. Usually this is a few cents per day, which is several times less than that of the company itself.

Tricolor TV is one of the leading companies in the field of digital telecommunications. Numerous customers can enjoy quality digital television and a fairly extensive list of theme packs. However, sometimes it happens that the channel encoding unexpectedly occurs, and instead of the usual programs, the TV shows only the inscription “Encoded channel (DRE)” or “No access”.

What to do in this situation and how to decode Tricolor TV channels on your own

There are several reasons why a channel or all TV channels can be encrypted at once. Having identified it and eliminated it, you can independently adjust the operation of the receiver without contacting a specialist for help.

Prices in 2020 for Tricolor TV service packages vary from 6 to 12 thousand rubles. This is a considerable amount, which not every user can afford. Therefore, more and more often they began to use specialized programs to decode channels that hack the receiver, which is due to the virus.

But it is worth remembering that the virus can also negatively affect the entire system, including the TV.

Reasons and their solution

Reasons for coding channels:

1. The first reason for encoding occurs is an overdue payment for Tricolor TV services. An untimely paid bill entails turning off the TV broadcast, and as a result, the encoding of the channels. After the payment is made, this problem should disappear. It is important to remember that when paying, you must specify channel packages. Therefore, it is recommended to carefully monitor the state of your balance. It is best to do this in personal account on the company's website or through an online service.
2. When ordering a service that you have not used before, pay attention to whether your tuner can support the desired format. If not, then you will again face the problem of the encrypted channel. For example, the "Maximum" channel package can only be played with HD-capable equipment.
3. In the event of a long absence of communication between the receiver and the satellite, the problem of idle channels may also arise. This may be due to lack of power. AT this case the receiver will not receive activation keys for paid channels and simply will not be able to connect them. A similar situation may arise if, after payment, the tuner was not connected to satellite dish. You can solve this problem by turning off the receiver for one minute, then turning it on, find free channel to make sure the equipment is working. After the picture appears on the screen, go to one of the paid channels and wait until it connects. In some cases, the period for obtaining activation keys is up to eight hours.
4. It is not uncommon for favorite channels to disappear due to unfavorable weather conditions. Unfortunately, it will be possible to improve this situation only by waiting until the elements calm down.
5. An outdated receiver model can also cause channel encoding.