Do-it-yourself frying pan from a harrow disc. Frying pan from a harrow disk How to make a frying pan from a harrow disk

Today, a wide selection of kitchen utensils is presented to the attention of lovers of cooking various dishes. Judging by the numerous reviews of tourists and supporters of picnics, one of these products is a camping pan made from a cultivator's harrow. Its cost varies from 50 to 100 US dollars. Many home craftsmen prefer not to spend money and use handicrafts. You will find information on how to make a frying pan from a harrow disc with your own hands in this article.

Acquaintance

Who is the author of the frying pan from the disk is not known. Nevertheless, the idea of ​​using a cultivator disk was picked up by many craftsmen. The demand for these products is quite large. Judging by the reviews of the owners, you can cook many different delicious dishes from meat, potatoes, fish, mushrooms and other products in a frying pan from a disc.

It's also great for stewing vegetables. Meals are prepared outdoors with a gas burner. Read on to learn how to make a frying pan from a disk with your own hands.

What will be needed for work?

Before you start making a frying pan from a harrow disc, you need to get the following:

• Disk.
• A piece of metal.
• Gas welding machine.
• Angle grinder (grinder) with cutting and grinding discs to it.
• Gas burner and cylinder.
• Vegetable oil.

About the disk

The basis of the product will be directly a 50-cm cultivator disk with a thickness of 6 mm in the center and 4 mm along the edges. Visually, it resembles a frying pan. However, this device will weigh more than 10 kg. To get hold of a disk, a home craftsman will have to go to farmers or to a point where they accept metal. You can also buy a disc from the owners of agricultural machinery.

Since the disks are made of high-alloy steel with nickel, copper and nitrogen additives, they have enhanced performance. In this regard, the owner may not worry that his homemade frying pan will burn out. It is difficult to judge how unhealthy such a frying pan is, since stainless steel, especially Chinese manufacturers, can also contain various impurities.

Where to begin?

For those who are going to make a frying pan from a disk, but do not know what to do first, experts recommend first making a patch from a piece of metal. Next, the diameter of the hole in the center of the disk is measured, along which it will be machined. At this stage, the work is done by a grinder with a cutting wheel. It is important that it has an internal thread for the handle. To do this, you need a lathe. If there is no such equipment at home, then you will have to order it from a professional turner. After the core is ready, it must be welded to the center of the product using gas welding. The main thing is that the hole in the disk is completely filled with metal.

Second step

The frying pan from the disk can be fixed different ways. Judging by the reviews, most craftsmen do this with a pin, which is connected to the core with a thread. Next, the pin is stuck into the ground. In addition, you can use the supporting removable legs. For this purpose, several nuts or turned blanks containing an internal thread are welded along the edges of the disk. The pan will stand on metal legs with external threads. It will be much more convenient to use the product in nature if there are handles in the design. They are bent from rods, and then welded to the product.

Product grinding

At this stage, you should do the weld. To do this, you need a grinder with a grinding wheel installed on it. The weld seam should be cleaned as evenly as possible. Since the disc from the harrow will be used as a cooking pan, it is important that it is clean. Therefore, after the seam, the craftsmen usually begin to remove rust on the entire product.

Final stage

According to experienced craftsmen, the operation of the product is possible after its preliminary calcination on fire. This procedure is performed as follows. First, salt is poured into the pan. One pack will be enough. Next, you need to make a fire and place the product over it. Keep it over an open fire until the salt turns black. This will take approximately half an hour. After that, the frying pan from the harrow is thoroughly cleaned from salt residues. Now you can ignite with oil.

For the procedure you will need pork fat. Judging by the numerous reviews of home craftsmen, sunflower oil is also suitable for this purpose. It must be poured into a frying pan, which is placed back over an open fire. With the help of a clean cloth dipped in fat, all hard-to-reach places are thoroughly wiped in the product. You also need to keep the pan for half an hour. Then the rest of the oil is poured out. Only after completing these steps, the frying pan from the cultivator harrow is considered ready for use.

Frying pan for a fire from a harrow. How to make a frying pan from a harrow with your own hands, manufacturing options, photos, videos.

Today's homemade product will come in handy for avid tourists and picnic lovers in nature. We are talking about a camping pan for a fire, which we will make from a cultivator harrow disc.

The harrow disc itself is made of high-alloy steel, so your frying pan will never burn out and will last forever.

I want to clarify right away that high-alloy steel has additives that increase the characteristics of the metal, so the metal from which the disc is made also contains additives such as nickel, copper and nitrogen, although not in large quantities, but they are still present.

It is difficult to say that such a pan will be harmful or not to health, because household pans, especially those made in China, also contain metal impurities, even stainless steel.

Manufacturing.

So, we have come to the main question, how to make a frying pan from a harrow disc. The disc itself must be processed with a grinder.

On a lathe, turn the core with an internal thread with a screw-down handle. If you do not have a lathe, you can order this work to any turner. The core is welded in the center of the disk.

There are several ways to fix a frying pan over a fire:

With the help of a pin that is screwed into the core of the pan and stuck into the ground.

The frying pan can be installed on supporting removable legs.

The legs are threaded, and nuts or turned blanks with internal threads are welded to the pan itself.

For convenience, you can bend and weld handles from the rod.

The idea of ​​making a frying pan from a harrow disc is not new. This device will help you cook an incredible amount of delicious dishes at a picnic or, for example, in the country. Such a frying pan is made from a harrow disc, which is used in agricultural machinery. For the manufacture of such a disc, high-quality steel is used. The disc is quite heavy in weight, but even a plus for using this spare part as a kitchen utensil. Thick steel distributes heat better and retains it, hence, dishes are cooked quickly and do not burn. By the way, until recently it was hard to believe that meat or vegetables would not stick to the surface of the pan during cooking. Unbelievable, but true! Food doesn't stick!
We offer you a master class of a frying pan from a harrow disc, using a drawing and detailed instructions a skilled craftsman can make an excellent brazier in which you can fry potatoes, vegetables, sausages, meat and other products.
The pan will stand steadily on three removable legs. It is very convenient for transportation. The frying pan in a collapsible form will easily enter any car trunk.

To independently make a frying pan from a harrow disk, we need:

• Disk from a cultivator. It is ideal to use a disc from an imported cultivator, because it has better steel.
• 3 long bolts m16*300 and 3 pcs. nuts for them
• 2 U-shaped ladders for handles
• Tractor valve (for welding holes)

Tools:

• Welding machine (preferably semi-automatic);
• Angle grinder (Bulgarian);
• cutting, cleaning discs and a wire brush for it.

How to make a frying pan from a harrow disc

We suggest that you familiarize yourself with the drawing for the manufacture of the disc.


We weld 3 nuts to the convex side of the harrow disc. This will be the base for the removable legs of the pan.


We cut the valve stem with a grinder for welding small holes and the valve cap for welding a large hole. All the holes that are on the disk are thoroughly scalded with a semi-automatic device on both sides.




Then, with a grinder with a cleaning disk, we align the seams on the surface.


Next, we dull the sharp edges of the disk.


We carefully sand the entire product with a wire brush. The concave side of the disc (working surface) must be perfectly smooth.
Now it remains to weld the handles.


The frying pan from the harrow disc is ready!

Preparatory work for using the disc as a frying pan

Before you start cooking in it, you need to make a few more manipulations. Thoroughly rinse the pan and wipe it dry.
Then we make a fire under the pan. Pour a pack of ordinary table salt into it and calcine well for 10-15 minutes.


Remove the salt and wipe the surface with a dry cotton cloth.
Next, pour in vegetable oil and heat well again.


Instead of vegetable oil, you can use pork or any other animal fat.
Drain the oil and wipe the inside of the pan with a dry cotton cloth. Everything, the pan is ready for use!
Important! After each use of the pan, grease the surface of the pan with oil. This will prevent rust.
Store the frying pan from the harrow disc in a dry place.
For such a frying pan, I advise you to purchase a spatula with a long handle, for mixing dishes.

Difficult

Ingredients

• 2 kg potatoes;
• 400-500 g of salted lard;
• 3 medium onions;
• Salt;
• Greens.