Computer literacy, help and repair

Connecting a repeater tp link. Review of the TP-LINK TL-WA850RE amplifier

Coverage Amplifier Setting wireless network TP Link tl wa850re can be carried out using WPS technology by pressing a pair of appropriate buttons, or using the repeater's web interface for more detailed configuration. In addition to detailed description of these methods, the article describes the main problems that arise during configuration, and how to solve them.

Wireless connection

There are several ways to set up your TL WA850re as a repeater. The first option is to use WPS technology, thanks to which the user does not have to make any settings on his own. Your tp link modem must support WPS protocol. To activate the repeater follow the instructions below:

The RE indicator stands for Range Extender. It has the following modes:

  • constantly lit (repeater is successfully connected and duplicates the signal);
  • flashing (the procedure for connecting to the modem is in progress).
  • off (repeater is not connected to router).

The Wireless LED should be on. This indicates that the wireless mode is on. The tp link wa850re repeater completely repeats the parameters of your local network: name, password and channel used. If you need to do more fine tuning or your router does not support WPS technology, then you should perform manipulations using the web interface.

Ethernet connection

The web interface allows you to perform full customization tp link wa850re. When you first start it, the repeater does not yet know the name of your network, so in wireless mode you will not be able to configure the repeater repeater. To do this, you need the Ethernet cable that comes with the kit. Install and configure tp link wa850re according to the following instructions:


If your network is not listed, click “Refresh” several times or move tp link wa850re closer to the router.


The tp link wa850re is now fully operational. It expands the coverage of your network. Disconnect your laptop from the extender and try connecting via Wi-Fi.

Operating modes of the device

TP "Link wa850re" can work as an adapter and repeater. The management process tp link tl wa850re does not provide for any actions on the part of the user. The device can work simultaneously in two modes. The repeater mode is activated immediately after switching on and quick setup via the control panel. This is the main function of the repeater.

If you need a repeater as an adapter, you just need to connect the required device (Blu-ray player, set-top box or laptop) via the RJ-45 interface. The Repeater TP Link will automatically provide the device with Internet access. He will also be presented with his own IP address thanks to the work of the DHCP server. It is active by default, but if you want in the LAN section, you can disable it or set a static IP address.

Access point setting

After successful connection of the repeater, you can configure some parameters of the modem through the web interface. We recommend that you look at the "Wireless network" section. It is there that the network name and password from it are set. In the subsection "Wireless settings" the user can change:

  • tp link wa850re operating mode (universal or WDS);
  • region;
  • host modem network name;
  • MAC address;
  • amplifier network name;
  • channel width.

  • security level (none or WPA2-PSK, or WEP);
  • protection version and encryption type;
  • password from the amplifier network.

If necessary, you can also set the filtering of MAC addresses, but all other settings are not needed for an ordinary user.

What do the numbers 300 Mbps, 900 Mbps and 1900 Mbps mean?

These numbers represent the transmission and reception rates between the router / repeater and the device connected to it. The standard is 300 Mbps (megabits per second). Under ideal conditions without interference or interference, the transmission rate will be the stated number. In reality, the speed is significantly lower due to obstacles, overlapping channels and various interference.

The higher the transfer rate, the more expensive the device is. It should be understood that if your provider provides a connection speed of 100 Mbps, then you will not be able to get a higher data transfer rate using a modem or repeater, even if it has 300 megabits or more in the specification.

Wi-fi amplifier tp link tl wa850re

The extender supports EEE 802.11n standards and also performs 64/128/152-bit encryption according to WEP, WPA2-PSK and WPA-PSK standards. The device has compact dimensions, so you can easily connect a Wi-Fi amplifier even in hard-to-reach places. To determine the signal strength, there are indicator lights on the right semicircle.

The range of the modem is 2.4 GHz. The tp link wa850re uses the Qualcomm Atheros AR9341 chipset.

Checking connected devices

Through the repeater settings, the user can view the list of active devices. To do this, you need to do the following:

The window will show all the devices that are connected to the amplifier.

Using a repeater TP-LINK TL-WA850RE will allow significantly.

This will solve all problems that arise from a bad router signal, including low internet speed.

How does a repeater work and when should you use it?

A Wi-Fi repeater is considered a separate device whose task is to amplify the signal of an already configured network.

This process takes place by connecting the repeater to the router via a web interface or an Ethernet channel.

The amplifier model must match the router. Popular manufacturers such as others produce repeater lines for their respective routers.

The compatibility of devices must be indicated in their technical parameters.

The appearance of the repeater may differ depending on the model and brand, but they are all small, much smaller than a standard router.

The gadget looks like an ordinary socket. There are also repeaters that completely replicate the shape of the router.

You can buy TP-LINK TL-WA850RE, like any other amplifier model, in almost all stores that sell computer equipment and communications.

The cost of such a gadget is equal to the price of a budget router.

Fig. 1 - appearance TP-LINK TL-WA850RE

The repeater is advisable to use in the following situations:

  • To enhance the signal in the office network. TP-LINK TL-WA850RE is able to significantly increase the coverage range even in large rooms;
  • For home use. Users often face a problem. Uneven distribution of the signal in an apartment or house can lead to an instant disconnection of the Internet on the device and the loss of unsaved data.

As a rule, in order to increase the signal level and, accordingly, the speed of the Internet, users begin to do a lot of unnecessary and sometimes ineffective work.

Constantly dragging the router around the entire perimeter of the room, buying additional wires, connecting to a more expensive provider's tariff - all these actions will not be able to improve the operation of the router.

To solve the problem, it is enough to purchase a small and inexpensive repeater.

The principle of operation of the TP-LINK TL-WA850RE gadget is very simple: you plug it into an outlet closer to the router.

Then you set up the connection of the two devices. As a result, a coating will appear in the house, which will be several times more powerful.

To create the best signal level, which is simultaneously connected to the antennas of the router and amplifier.

Thus, the area for client connections is increased. The principle of signal amplification is shown schematically in the figure below:

Fig. 2 - the principle of interaction between a repeater and a router

As you can see, the task of the repeater is to receive the signal from the router and distribute it further in the room, where the usual coverage of the router no longer works.

TL-WA850RE Router Compatibility

TL-WA850RE is a universal type extender. It works with all routers manufactured by TP-Link.

There are no restrictions on the compatibility of any of the characteristics of the two gadgets.

Due to its unique and compact form, as well as the presence of special slots for connecting cables, TL-WA850RE can be used not only as an amplifier, but also as a wired device to connect to the Internet.

Fig. 3 - control panel and connectors in TL-WA850RE

Overview of characteristics and equipment

TL-WA850RE is the most popular amplifier for TP-link. This model can be found in almost every online store.

Let's take a closer look at all the features and characteristics of this gadget.

Amplifier complete set. The gadget comes in a branded box from the manufacturer TP-Link.

Before buying, first of all, you should pay attention to the box and its distinctive features, because with the growing demand for this extender, counterfeits began to appear.

The original box is decorated in blue and white colors. The box should include the following information:

  • Manufacturer - TP-Link (The Realizable Choice);
  • Description of the structure and principle of operation of the repeater;
  • Indication of model, device type (Range Extender) and maximum operating speed (300 Mbps).

The appearance of the official box is shown in the image:

Rice. 4 - amplifier box TL-WA850RE

The following items are included in the package of the gadget:

  • The extender itself (white body and blue border of the router connection button);
  • User's manual for setting up (in Russian and English);
  • Brochure showing device parameters;
  • Warranty document;
  • Mini-disk with which you can view all instructions and other documentation for the repeater on your computer;
  • Adapter. With it, you can connect a TV, router or router to a repeater.

Rice. 5 - amplifier package

Thanks to the unique design of the repeater, the manufacturer managed to remove such a detail as a power supply from the package.

The body of the device is designed in such a way that it can be immediately connected to an outlet without worrying about constant recharging from external sources.

Rice. 6 - appearance of the extender from TP-Link

The body of the gadget is made of glossy white plastic. Dimensions: height - 11 cm, width - 6.6 cm, thickness - 7.5 cm.

On the front cover of the amplifier there is a panel of buttons and operation indicators. The main element is this. With its help, you can connect to the router in one click.

If the amplifier is connected to the mains, the button will light up blue.

Rice. 7 - image of the front panel of the gadget

On the bottom panel of the gadget there is a reset button (emergency device recovery), a port for connecting an Ethernet cable.

The repeater works with 802.11b / g / n connection standards. The range of work is 2.4 GHz, and the speed reaches 300 Mbps (maximum).

The main component of the repeater is the Qualcomm Atheros AR9341 chipset.

Features and benefits of use

The extender has the following advantages:

  • Possibility to configure the optimal connection option. Depending on the type of device that creates the network, you can connect to the amplifier using a wired Ethernet connection or set up a wireless connection using WPS technology;
  • Compact body that contains all the necessary ports and indicators without the need for additional power supplies and wires;
  • Work indication. This allows you to quickly determine the status of the connection and correctly;
  • TL-WA850RE works without problems, both in open networks and in coverage that uses encryption, in particular, the most common WEP and WPA / WPA2 standards.

Rice. 8 - TL-WA850RE demo

Remember! The stability of the repeater directly depends on the quality of the router itself. If there is a problem with the network, you should first update the firmware of the router or replace it with a new model.

Setting up a repeater

The standard setup procedure will take no more than a few minutes. Typically, users need to set up a repeater to router connection.

To do this, just follow these steps:

  • Take an amplifier and plug it into an outlet;
  • Wait for the gadget to load. This will take 1-2 minutes. Work activation status is shown by indicator lights;
  • ... To do this, simply press the corresponding key located on the front panel of the case;
  • Find the key to activate WPS on your router and click on it.

The router will connect to the extender. In turn, strengthen will completely duplicate all the parameters of the existing network, creating a new instance of it.

The parameters of the active network include login, password and channel number. Note that the repeater has a different IP address from the router.

Thanks to the WPS connection, you don't have to deal with interface settings and wired connections.

This technology can also be used when connecting the amplifier to TV, game consoles.

The only requirement is that the second device must also support WPS.

Expansion of the existing network will be terminated if at least one of the devices (repeater or) is disconnected from the power supply.

Rice. 9 - schematic configuration of the router and repeater connection

Connecting TP-LINK TL-WA850RE to a router without a WPS key

Some do not support WPS, so you may not find the corresponding key on the router toolbar.

The amplifier developers foresaw a similar situation, so they created the ability to connect two devices via the router's web interface.

Follow the instructions:

  • Plug into a power outlet. This will create open network with the name of the amplifier. Connection to it is possible through the settings of your router;
  • Using any browser on your computer, enter the address 192.168.0.254 into the address bar. Press Enter. It will automatically connect to the extender web interface;
  • Enter your username and password to gain access. By default, these are admin and admin. The main window of the amplifier web interface looks like this:

Rice. 10 - main window of the TL-WA850RE amplifier interface

  • Click the WPS tab on the left menu. Repeat all the parameters shown in the figure below. It is not necessary to use a PIN code to access the repeater's network. After configuring the active status of WPS, click on the Add device button and select the name of the router from the list provided;

Rice. 11 - configuring WPS manually

If you want to use the repeater in several networks at once, you must create separate work profiles.

To do this, go to the Profiles tab and add a separate element for each router.

Rice. 12 - setting up multiple profiles

Testing the device

Extender test results are a comprehensive diagnostics of the speed of the Internet connection at different distances from both the router and its extender.

The test results are summarized in a diagram, which is shown in Figure 13.

The test showed that the TL-WA850RE copes well with the task of expanding coverage to 30 meters or more.

The speed gradually decreases with increasing range, however, the Internet continues to work without interruptions.

Rice. 13 - test results TL-WA850RE

Outcome

When faced with the problem of poor network connection, it is better to get a small TL-WA850RE amplifier.

Review of the TP-LINK TL-WA850RE Wi-Fi signal booster which allows you to increase the Wi-Fi coverage area

The TP-LINK Wi-Fi Signal Amplifier with a data transfer rate of up to 300 Mbps model TL-WA850RE is designed to expand the coverage area and increase the signal strength of an existing wireless network, as well as to eliminate "dead zones" in homes, apartments, hotels and offices ... In general, in fact, the signals of the original network are not amplified in any way, but a new network is created, connected with the first, which allows you to increase the coverage area. TP-LINK TL-WA850RE is made of white glossy plastic, thanks to its compact and convenient housing, the amplifier is easy to install and carry

Full description

TP-LINK TL-WA850RE - signal amplifier, wireless, device speed reaches 300 Mbps.

It amplifies the signal where the signal is going and even where there is no way to lay the cable.

It has a beautiful design in a small size. This makes it possible to install the device anywhere and connect to any available outlet. The coverage area of ​​the network is made larger by pressing a single button called Range Extender.

By wirelessly sending data at 300Mbps and small in size, it can easily expand the area covered by the wireless network. The Ethernet port enables the TL-WA850RE to operate as wireless adapter, and connect wireless devices.

How TP-LINK TL-WA850RE works

It is needed in order to connect wireless devices, expand the area over which the network extends, and remove dead zones. This makes it possible to improve the wireless connection without any problems. Thanks to the transmission power of 300 Mbps, the device can be considered ideal for watching movies in good quality, playing games or listening to music.

Thanks to its beautiful and small body, you can easily install it where you need it, as well as change its location. Another big plus is that he easily remembers the network to which he has already connected. If you replace the router, you do not have to re-configure the functions on the device.

You can easily increase the coverage area of ​​the network, while, without installing a cable yet, this can only be done by pressing a button. You can set up a secured connection by pressing the Pair button.

The question of how to increase the range of a wireless network arises with an increase in the number of subscribers and their distance from the access point. The manufacturer TP-Link specifically produces models of Wi-Fi repeaters or amplifiers to address this issue. But these devices are not universal.

Installing an additional router and configuring it as a TP-Link repeater expands the Wi-Fi range of the main router.

The original firmware of the TP router does not allow working in repeater mode, that is, as an amplifier for the existing network of the main router. This opportunity appears when it is replaced with an alternative firmware DD-WRT. However, this operation leads to the termination of the manufacturer's warranty.

The purchase of the TL-WA850RE repeater from TP-Link solves the problem of expanding the Wi-Fi range.

This solution is optimal. It doesn't take long to set up. On the main router whose signal you want to amplify, press the WPS button.

TL-WA850RE Configuration Manual

On the device installed in the zone of reliable reception, press the button with the image of the lock, wait for the RE indicator to light up. After the TP repeater connects to the main router via Wi-Fi, its signal is retransmitted over a greater distance. An electronic graphical scale is available for assessing the pulse level. Stable work corresponds to 2-3 of its divisions. Achieving greater range is possible through the use of multiple repeaters.

Another way to increase the coverage area is to use the "wireless bridge" mode, which is standard for a TP-Link router.

Wireless Bridge Configuration

Two Wi-Fi networks will be created, but with well-chosen settings, users do not notice this. When they move, they will exploit the one with a stronger signal at the location of the subscriber. The main router, ideally, should also be from TP-Link. It is not always possible to "make friends" a configurable router with a product of another manufacturer.

So, the main router is configured and distributes Wi-Fi to subscribers. You need to make changes in its settings.


Manual configuration

There is a chance for TP by mechanical means.

  1. For this, the connector of the network card of an external computer is connected with any LAN port of the future signal amplifier using a patch cord.
  2. After entering 192.168.0.1 in the address line and pressing Enter, you need to log in using the values ​​admin / admin.
  3. After entering, a menu window opens, where we select the "Network" section, and in it - the LAN item.
  4. Now we assign a new IP address to the TP repeater, which is on the same subnet with the main router. For example, 192.168.0.2, we execute the "Save" command.
    If additional confirmation of address change is required, click OK and save.
  5. After rebooting, we enter the TP-Link repeater menu using the new IP address, check the set channel number. The latter must match the channel of the main router set on the device in advance. If this is not the case, when the WPS mode is disabled, register the desired channel and put a checkmark in front of WDS.
    We save the entered values.
  6. New fields now appear on the page. Find "Search" and click on it.
  7. A list of available Wi-Fi networks opens. From them, select the one created by the main router, click "Connect".
  8. On the page that opens, write down the network name - SSID - and the region that match the corresponding values ​​of the main router. And also we drive in her password, select the mixed mode 11bgn, save the entered values.
  9. In the "Wireless Security" section of the menu, specify WPA / WPA2-PSK with AES encryption, write down the repeater network password, save the entered values.
  10. In the DHCP section, disable the use of a DHCP server.
  11. After executing the “Save” command, the TP-repeater “leaves” for reboot. At the end of the process, a message appears stating that the configuration was completed successfully.

Checking the operation of the WDS mode

WDS is a technology due to which all subscribers of an extended Wi-Fi network are connected to each other via an access point. To create it, it is necessary to implement the "wireless bridge" and "repeater" modes. To check the activation of WDS in the configured repeater menu, select the "Status" section. The line “WDS Status” should display “Installed”.
Also, information about the SSID, communication channel number, MAC address of the device and other parameters previously entered when configuring TP should be available.

Connecting equipment to a Wi-Fi network with WDS

Devices with a wireless module can be connected to the network: laptop, tablet, smartphone with Wi-Fi support. On the computer, on the right side of the task bar (tray), we find the Wi-Fi connection symbol, click on it with the left mouse button. A list of active networks opens. Among them, select the one created by the user, connect to it by pressing the "Connect" button. After entering the network password to the main router, we are convinced that the device is able to distribute "internet" if there is a connection to the provider.

Checking the connection of devices to the TP Wi-Fi repeater

With the main router and repeater turned on, you need to check the connection of wireless devices to the repeater network, and not the main router. Having moved away to a distance where reception was previously impossible, we turn on the gadget and check the connections. To confirm the operation of the TP-repeater, go to its menu, in the "Wireless mode" section, select the "Wireless statistics" item.

On the new page, in the list of x devices, there is the MAC address of the product we need. If it is not there, but the Internet is working, it means that there is a connection to the main router. Check the TP repeater settings again. In this situation, disabling WPS mode in the settings of both devices helps. If there is the address of the gadget being checked in the list at a considerable distance from the repeater, we conclude that its setup was done correctly.

Restoring the TP repeater parameters

If the connection to the TP repeater network did not occur, or the password for access to it was lost, it is possible to restore the repeater parameters and return to the factory settings of the router. To do this, press and hold on the rear panel of the device for 10 seconds. Reset button.
After the end of the recovery process (about 30 seconds), repeat the operations described above, carefully following the instructions.

A Wi-Fi repeater (also called a repeater or repeater) is a wireless device used to extend network coverage. It can be used to connect to wireless internet in places with poor signal reception from the router. In this case, the repeater will receive the signal from the router and relay it to the clients of the local network.

Choosing a place to install the repeater

The maximum efficiency of using the repeater is achieved when it is installed at the border of a stable Wi-Fi reception from the router. When choosing a location, consider the layout of the room in which the repeater will be used. You should also pay attention to the location of wireless gadgets from which you will connect and access the Internet.

When looking for the best place to install the repeater, measure the access speed. To do this, you can use online services such as Speedtest. For the installation of repeaters, the same recommendations apply as for other wireless devices. Do not place the repeater near large electrical appliances that may interfere with the network. If you have antennas, point them perpendicular to the plane in which radio propagation is required.

Turn on the Wi-Fi repeater

Most repeaters have a built-in power supply, so they plug directly into an outlet. This design allows you to get rid of unnecessary wires, since the cable connection between the power supply and the device is not required. The downside is reduced mobility. Installing the repeater at a considerable height is possible only when using an extension cord or moving the outlet.

To turn on the device, simply plug it into a power outlet. Almost all models of repeaters start working immediately after the start of the power supply. But if your device has a separate power button, press it. The start of work is signaled by LEDs on the case. The meanings of the various display modes (continuous light or flickering) can be specified in the instructions.

Note! Some repeaters are equipped with one or more connectors for connecting a network cable. With their help, you can connect the Internet on computers that are not equipped with a Wi-Fi module.

Connecting using WPS

If the device has a WPS button, press it to activate Wi-Fi connection mode without selecting a network and entering a password. After that, press the same button on the router, no later than two minutes after turning on Wi-Fi Protected Setup. With a normal signal and no technical difficulties, the repeater will connect to the wireless network and begin to duplicate it.

Some routers do not have this button. To connect to them via WPS, the router's web interface is used. You can open it in any browser by typing the router's IP address in the address bar. Typically, it is indicated on a separate sticker located on the bottom of the device. The same sticker contains the login information: the name of the standard account and password.

Advice! Connection is also possible by entering the repeater PIN-code in the admin panel of the router. The code can be specified on the box or on a separate insert.

Tutorial Video: Quick Repeater Connection

Configuring the repeater via the web interface

You can specify additional parameters or configure the network when using a router without WPS in the administrative interface of the extender. As in the case with the web interface of the router, login and configuration is performed through a browser. Authorization data is also indicated on a sticker, insert or instructions.

Share with friends:
Similar publications