What to do if the android is lying down. Exclamation mark on the phone

What if the tablet does not turn on?

It happens that while playing games or working on the tablet, it stops working and does not turn on. The main reasons can be roughly divided into two categories: problems with the device’s hardware - these are malfunctions of the battery, connecting cables, boards, or some problems with the software - incompatibility of programs, the operating system crashed or was installed incorrectly after the update process.

Let's take a closer look at individual cases of tablet malfunctions.

Absolutely no signs of life
1. The simplest and most common reason is a completely discharged tablet battery. To check this version, turn it on and wait at least 10-15 minutes. Only after this the tablet will be able to accumulate the minimum amount of energy to turn on. Press and hold the power button on the device and wait for the screen to light up. If the screen turns on, check if it is working properly charger- take another one and do the steps described above. The tablet turned on, but the charging process does not proceed, you need to find out why won't my tablet charge? .

2. If a child was playing with the tablet, he may have damaged it by hitting it on the floor or corner of furniture. Most likely, part of the display has been damaged, in which case it can be replaced. The tablet itself is in working condition. Screen damage is usually visible to the naked eye.

3. If mechanical damage the device did not have one, a rare case - the video adapter failed.

If you find such signs and there is a valid warranty on the device, run to the salon and wait for repairs; it is simply unreasonable to do repairs yourself.

The patient is neither alive nor dead

When the tablet turns on, but not completely, but freezes during the boot process (only the splash screen is on the screen), we are dealing with a software glitch.

The reasons may be the following:

1. Some programs or games are not installed correctly.
2. You forcibly terminated system processes, possibly through third-party software or task manager.

Procedure:

You can try to save the tablet by resetting the system to factory settings. It is best to find information about this on the Internet, because each device model has its own nuances. Or use the program hard reset. Using these instructions, you can reduce the procedure to the following:

1. Turn off the device.

2. Remove the SIM card and memory card.

3. Press the volume up key (on some models - down) and the button to turn on the tablet. Hold for about 10-12 seconds

4. If the tablet vibrates and a menu appears on the screen, you are on the right track. Select Settings, then Format Systems.

5. Reset the system - Reset Android.

6. The tablet will reboot with factory settings.

7. Try this scheme several times, it should work.

If unsuccessful, read the information on the topic “ How to unlock your tablet". Additionally, an excellent option for device resuscitation is flashing the tablet. In case of unsuccessful device firmware, good practical advice is given here.

Exclamation mark on a lying android


If an image of a lying green Android appears on the device screen, and there is an image of a red exclamation mark on it, you are in stock Recovery mode. There's nothing scary about it. Need to install the modified recovery ClockWorkMod Recovery. You got into it because you made a mistake when entering the combination to reset the settings, because each tablet model has its own combination. Press the power button and hold for a while until the device turns off, you can simply wait 3-5 minutes until the device finishes working on its own. As a last resort, you can do the flashing again.

What is Fastboot

The user can enter the mode Fastboot mode , in this case the android is also on the screen, but there is no exclamation mark. You need to use the volume buttons to get to the menu item Restart bootloader, use the power button to make a choice, sometimes this helps to revive the tablet.

Remember that each device model has its own “chips”. Some tablets easily reset their settings after pressing the home button while the Android is lying down, others only respond to simultaneously pressing the plus and minus buttons in the volume control for a long time.

Is your Android smartphone malfunctioning? Bring it to us!

If the phone screen shows an exclamation mark and the green android (symbol operating system) is lying, this means that the operating system of your device is lying.

Android lies - Exclamation mark on the phone!

The system refuses to work because:

• Android is damaged by a virus;
• an application incompatible with the OS was installed;
• the phone was flashed incorrectly (ineptly) or with an incorrect OS version.

How to upgrade Android?

1. Even a non-commercial antivirus quite reliably protects the system from malware. Ignoring the risks of viral damage costs yourself more.

2. If there is incompatibility with the application, the problem can be resolved by pressing the “reset” button. After a reboot, the device will most likely work.

3. It is guaranteed that the exclamation mark on the phone will disappear, the android will greet the user again after flashing - Android installations OS to the gadget's formatted disk. But you can try to raise the system without firmware, by resetting it to factory settings. For this:

• We enter the settings menu using a combination of touch keys: home, power and the volume down key, pressing them together (provided that the home key is available), wait until the service menu appears;
• In the menu, use the touch volume control to select yes, the device should reboot automatically;
• if it does not reboot, select the rebootsystemnow menu item.

Important!

When resetting to factory settings, all user data (photos, recordings, etc.) will be lost. Cheap Chinese smartphones support for Cyrillic and Latin alphabet is being dropped. In order not to have problems with decoding hieroglyphs, and especially not to damage the “filling” with unqualified firmware, it is better to immediately contact a specialist at the nearest service center. The service also provides a guarantee of servicing the restored software. To store personal data, it is better to use computer hard drives or flash drives.

If you are a simple user and you don’t have time to figure out how to remove exclamation marks on your phone, lying androids or other misfortunes, then the easiest thing is to contact service center CHIP. Our specialists will get your gadget’s operating system in order in a short time and at an affordable price. Phone firmware is one of the most popular services among our clients. Bring your sick gadget and literally in an hour or two pick it up completely healthy!

The green android robot no longer greets you when you turn it on, but lies accompanied by an exclamation mark.
So, if you observe this picture, the android is lying with exclamation mark, then you can be congratulated, you have made your first unsuccessful experiment in interfering with the software of your device. What is it, and most importantly, what to do with it and how to restore the viability of the device? The search for answers to these questions must begin, first of all, by finding out the reason that led to this condition.
If you installed an incorrect program for Android, then after rebooting it will definitely please you with an image with an exclamation mark. There is only one way out - to do a hardware reset by selecting Wipe data/factory reset in the engineering menu.

Entering the engineering menu if your Android is different on different Android smartphones, but the combination of the home, power and volume down keys is recognized as standard. On devices with touch button Home is usually a combination of the power and volume down keys. The key combination suitable for your device must be pressed with your fingers and held until the service menu appears on the screen.

After the inscriptions appear, you must select the appropriate item by moving up and down using the volume rockers. After selecting this item, several lines will appear on the device screen asking whether you agree to delete all data from your device. After selecting the yes line, the device memory will be completely cleared. The next step, if the device does not reboot automatically, select rebootsystemnow, which means rebooting the system. If after these operations your device has restored its functionality, then we can congratulate you. The only negative this method is the loss of all information - including contacts, SMS, photos and downloaded applications.

However, if you regularly synchronize your phone with Google and remember your login and password account, then your losses will be insignificant.
If the above method did not help, then a complete replacement is required. software. There are two ways - the first is flashing the device using a USB cable and a computer, but it will only help you if the “usb debugging” function has been enabled in the device settings. The second way is to update the software using a flash card through the engineering menu. Both methods are very risky and the slightest violation of the instructions will lead to the complete destruction of the device. At this stage, you should think about whether to try to restore the device yourself or trust the professionals.

If you nevertheless decide to flash an Android with an exclamation mark yourself, then you should carefully study all the information provided on the Internet on this issue. Certain types of Android devices have significant differences and features regarding software changes. If we briefly and generally describe this process, it looks like this: you find the firmware file on the Internet, download it, simultaneously studying reviews about this version and installation information. After this, you decide on the method of performing the Android recovery procedure with an exclamation mark.

If you chose the method using a USB cable, then unpack the firmware files into the root directory of drive C on the computer, install drivers for your smartphone if necessary, turn off the phone, use the key combination (usually the combination power+volume up) to enter the phone into firmware mode, connect via a USB cable to the device and follow the further instructions of the program. At the end of the process, be sure to hard reset device settings to standard using the recovery menu.

If you decide to resort to the second method and restore the software using the device itself and a flash card, then the steps are as follows - upload the firmware file to the root directory, insert the flash card into the phone and run recovery mode. After the appearance engineering menu select the recovery option using SD and wait. After finishing, you also need to reset your Android device.

If your smartphone runs on the platform and you connect to the Internet via Wi-Fi, you may encounter a display problem exclamation point next to the usual Wi-Fi icon. What does it mean? How to solve the problem and is it necessary to do it? Let's start with the fact that the symbol "!" indicates that it would be a good idea for you to find out more about the wireless network that you decide to use - the warning is associated with it. There may be many solutions to this problem, but so far we have found the only way that really works.

So, the problem is related to the wireless network. To solve it, we propose set a static IP address for this particular Wi-Fi connections. This means you need to know the available address in local network, gateway address and DNS addresses (DNS1 and DNS2) for the network. For the latter, you can use the default Google DNS addresses 8.8.8.8 and 8.8.4.4. We're not saying this is the best solution, but it works.

Procedure: