Setting up the Samsung 6 series cam module. Working with the CAM CI Plus access module "Tricolor TV", setting up channels, updating software

Outdated equipment is gradually being replaced by new, more convenient and functional analogues. This process has not bypassed satellite television, and therefore the question of where to buy a Tricolor TV ci cam module should no longer surprise anyone. Moreover, this device has a number of significant advantages over traditional receivers, which are sure to appeal to TV viewers.

The only significant drawback of the device is its high demands on the TV with which it will be used. Not every model will be compatible, and therefore before purchasing equipment it is worth clarifying whether there is any point in purchasing it. Perhaps it is worth giving preference to traditional equipment, which has not yet lost its relevance and demand. In short, users should study all the features and important nuances of connecting, setting up and operating the module, and only then make a decision about connecting satellite television.

Why do you need a conditional access module?

The main purpose of the proposed Tricolor TV ci module is to connect television. This device is a full-fledged analogue of a standard receiver, endowed with several significant advantages.

Among them, the following stands out:

absence of unnecessary equipment and wires that spoil appearance rooms;
high quality broadcasts (Full HD) and stable connection;
use of familiar methods of system management.

Among the disadvantages, we should again note the high demands of conditional access modules for televisions. They are compatible only with modern smart TVs, which not all TV viewers have. In addition, users may have a little difficulty setting up, since the process of searching for channels is slightly different from what it was before.

Where to buy CI-CAM module Tricolor TV

The question of where to buy the Tricolor cam module should not worry users. To purchase equipment, just contact any official store of the provider:

to the online store on the official website;
to licensed dealers;
Additionally, you can visit large retail chains.

You can find out the exact address of the nearest retail outlet where you can buy equipment and prices on the website satellite operator or from the contact center consultants by calling 880050001234. You definitely won’t have any difficulties finding information.

How to connect a conditional access module ci cam Tricolor TV HD

The process of connecting the Tricolor TV conditional access module, as mentioned above, is extremely simple. To connect the equipment, you will have to:

install a satellite dish and pick up a signal;
insert the smart card into the module, paying attention to its position (it must be rotated correctly);
insert the device into the ci-slot of the TV;
connect the antenna cable to the corresponding socket on the TV;
turn on the equipment, configure and search for TV channels (automatic is possible).

After which you can safely watch your favorite programs and shows. At the same time, the most difficult part of the connection, with which subscribers may have problems, will be the installation of the dish, since they will have to find the correct angle of inclination and rotation of the antenna. The remaining steps will not cause any difficulties.

Setting up the Tricolor ci module on an LG TV

After connecting the cam module, it needs to be configured. Users are able to cope with this task on their own. If they have an LG TV, they need to:

turn on the equipment;
set basic parameters on the start page, including the type of antenna and converter, satellite and the correct frequencies (12226);
turn on the power on the same page by moving the switch icon to the on position;
make sure the signal is reliable and the antenna is positioned correctly (the scale that appears should be more than 80% filled);
run automatic search TV channels;
save the results obtained;
select sound quality (MPEG4);
return to the start page again and enter the activation code.

Usually this is enough.

On Samsung TV

Setting up Tricolor with the ci module on a Samsung TV is a little more complicated. IN in this case users will have to:

open menu Samsung settings and indicate the satellite User Sat1;
make changes to the LNB section, indicating the same parameters for the upper and lower frequency limits;
open the channel settings section and re-specify the satellite;
click “create” in the line mentioning the transponder;
clarify frequencies and speed;
start an automatic search for TV channels.

It is worth adding that subscribers will need instructions included with previously purchased equipment. It contains the necessary information to correctly configure the equipment and indicate suitable connection parameters.

How to update the software of the Tricolor TV module

To update the Tricolor TV ci ultra HD module, you need:

turn on channel 333;
wait for a message prompting you to update the software;
start the process and do not interrupt it until it is completed (do not turn off the TV);
select broadcasting region;
agree to the proposal to search for TV channels;
save the result.

Additionally, you should know that if there is no message prompting you to update the software, you should open the menu and find the section for managing pop-up messages, where you need to move the slider to the on position.

Where to go in case of failure

In case of difficulties with setting up, connecting and updating television or the absence of channels in Ultra HD, subscribers should:

contact the contact center consultants using any in an accessible way(preferably call 880050001234);
or call the dealer from whom you purchased the equipment.

Setting up and connecting the Cam module
Tricolor TV

Currently, some modern TVs are equipped with integrated satellite tuner and a connector for the Cam module, which allows you to view TV channels from satellite operators. To view channels from the satellite operator Tricolor TV, it is better that your TV supports HD AVC broadcast standards (MPEG-4 H.264), which will allow your company to view programs in both the highest quality HD and SD formats.

To connect the Tricolor TV Cam module to a TV, you need to purchase the following equipment:
1. Instructions on what it really is, how to set up satellite Setting up satellite TV on Tricolor TV. How to set satellite influence on channels on lg tv. Cam-module Tricolor TV;
4.5. Smart card (included with Cam module and one-year subscription);
3. Satellite dish;
4. Don’t know how to set up Smart TV on a Samsung TV » How to set up Smart TV. Radial polarization converter;
5. Correct setting of Tricolor on Samsung TVs Tricolor on how to configure the module. Module for Tricolor TV Samsung DVB-S2 TVs. We reset the TV to as in the screenshot (10750. How to reset the settings on Samsung Galaxy S8 and S8. RG-6 cable (or analogue) for connecting the satellite dish to the TV.
Next you need to install and configure satellite dish to the broadcast programs of the satellite operator Tricolor TV (Eutelsat W4/W7 36.0`E) and using a television cable and F-connectors, connect it to the plug of your TV marked “SATTELITE”.

Tune

A satellite dish is an option without the help of others, but for high-quality broadcasting it is better to turn to specialists.

Next setup work

Cam-module Tricolor

We produce TV specifically with telecom:
1. Insert the smart card into the Cam module using full program(corresponding to the annotations on the sticker);

Module

CI on TV

Samsung

Process setting satellite channels Tricolor TV on Ultra HD brand Samsung. online store: .

Read also

How to remove applications from a Smart TV LG, Samsung Smart TV is designed for the use of various integrated ones, as well as installation by the user of the necessary applications, as well as access to the web for the TV. Smart TV provides a lot of necessary capabilities and...

How to delete an Instagram page if you forgot your password: and mail, via phone and computer Deleting Instagram if you forgot your password is a problem caused by various reasons. A person decides to delete a page due to lack of...

The computer does not see the network Several times I came across a problem in the comments that said that when setting up local network There were problems through the Wi-Fi router where the Windows 7 computer would not see the Windows XP computer. There...

An extraordinary true story, an average Netflix movie. Yeh ballet release date. Friday on Netflix Written and directed by Sonia Taraporevala Julian Sands, Jim Sarbh, part of the cast of Yeh Ballet Manish Chauhan as Nishu in Yeh Ballet In the late 20s...

How to install canon printer lbp 1120 on OS 10 x64 Download driver Canon LBP 1120 x32 (x64). Irkzus blog on IT abilities. equipment repair, website setup, SEO You can’t find official drivers for OS x64, it was easier for us at the workplace and...

Months ago, it was reported that older iPhones with low-capacity batteries were slowing down. Apple eventually confirmed that it was slowing down older iPhones that have naturally degraded batteries. The company took a lot of cotton for this...

Why you can't auto-tune

Tricolor channels

TV on Samsung TV

Manual setting TV Samsung to satellite Tricolor TV. How to set up WiFi (Wi-Fi) on Windows 8. Using Tricolor TV as an example, we will look at How to set up Tricolor TV on an LG TV. We configure it in such a way that it would be federal.
2. Insert the module into the TV connector;
We perform the first two points with the TV turned off.
3. How to set up Smart TV on a Samsung, Lg, Philips, Sony, Saturn TV. Connecting a Samsung TV to the Internet using a network cable, wireless connection WiFi, WPS, Plug & Access systems. Using the remote control, you need to reset the TV settings to factory settings. For this

press the button

. “menu” and select:. "support". "self-diagnosis". “reset”, press the “OK” button, after which the TV will reboot;
4. How to set up a Samsung TV to receive channels. How to adjust sound on Settings digital channels on lg TVs. digital channels. After the reboot is complete

press the button

5. In the “channel” menu, go down to the submenu “ satellite system" and click "OK";
6. A window will appear asking for a PIN code, where we enter the values. 0000 (default), a list of satellites will appear, where you need to uncheck all the boxes next to the list of satellites, except for the satellite with the designation. Eutelsat W4/W7 36E (if you cannot uncheck the marked satellites: remove the module from the TV and reset the TV settings again);
7. How to enlarge Asus Eee PC? Replace its native module random access memory 512MB by 1GB. Go to the “satellite selection” menu and select a satellite. Eutelsat W4/W7 36E.

Read also

Headphones from mobile phone are found in each of us. Usually, such an ordinary, but so necessary device migrates between the pockets of jeans, a jacket and a bag, so it quickly burns out and needs to be replaced. Don't rush to take it out...

Looking for the best gaming monitor under $150? Your gaming experience largely depends on the monitor you choose. Along with the right pair of speakers, you need to enjoy an incredibly immersive gaming experience, provided you have a good...

How to enter the boot menu on my laptop and computer? Do you want to boot your computer from a USB drive or disk? For this purpose, you do not need to enter the BIOS settings. Especially if you don't know much about it. Ultimately, of course, more...

modelPrecautions when charging your phone It’s not easy to find outGT-S5560Solutions and adviceHow long a phone or tablet should run on battery power. The operating time of the battery depends on several. Unfortunately, we could not find a single re...

The CAM module or conditional access module is designed for viewing encrypted satellite or cable channels. It is inserted into the CI slot of the TV or receiver and decodes channels intended for paid viewing. Some receivers, for example Skyway Classic 4, have two CI+ slots, which allows you to simultaneously watch paid channels from two different operators (for example Tricolor and NTV+). Today, many TVs are equipped with a tuner for receiving satellite signals and have a slot for a CAM module. However, to view encrypted channels of Tricolor and NTV+ operators, the tuner and slot must meet the following characteristics: the tuner must support the DVB-S2 format, and the slot must support the CI+ format. Although most TV brands meet these requirements, you should carefully study the specifications before purchasing.

Since modules are a fairly new development, many people find it difficult to initial setup and operation of CAM modules.

I would like to start with the fact that installing modules on TVs different manufacturers, varies and sometimes very seriously. LG proved to be the simplest and most loyal to the module. Here you just need to insert the module into the TV. Select a satellite dish in the menu and search for channels of a specific operator (Tricolor or NTV) and it will automatically and correctly find the channels of the selected operator.

But the most problematic from a setup point of view are Sony and Thomson TVs. You need to manually add the name of the satellite to them (remember that the satellite of the NTV-Plus and Tricolor operators is called Eutelsat W4 or Eutelsat 36E), as well as add transponder parameters (frequencies: 12226 for Tricolor and 12322 for NTV+) and converter local oscillator frequencies for both operators: upper and lower frequency - 10750. Then you need to select “network search”, and the TV will find all the channels of this operator. If there is no “network search” item in the menu, then all transponders will have to be added manually. Full list transponders are available on the operator’s website.

Now let's look at the most common problems and errors when working with the CAM module. The first and most common problem occurs when the TV initially initializes the module. When this happens, the TV sees the module, all information about the module and card is displayed in the menu, however, when the channel is turned on, it writes an error (the error code and explanation are different for different brands and TV models). In such a situation, you need to act as follows: turn off and turn on the TV. After turning on the TV, checking access rights between the TV and the module will begin again. In most cases, this method is more than effective. However, in some cases, for example, after a power surge or a sudden power outage, the settings of the module itself may be lost. Then the access rights check will not be carried out until the CAM module settings are reset to factory settings through the TV menu.

Now regarding the problems associated with software modules and TVs. Problems with modules not working correctly are usually found on early model TVs. But, fortunately, these problems can often be eliminated by installing the latest software for your TV. As for the module software update, it occurs only from the satellite. In NTV+ modules, the update can be turned on forcibly by simply selecting the required item in the menu. In Tricolor-TV access modules, satellite updates are broadcast for a limited amount of time (1-2 months), if during this time you have not managed to update the software, you will have to wait for the next one.

Despite the simplicity of the design, the CAM module cannot be bent or disassembled, and it is especially not recommended to reprogram the module, with the exception of the official operator software. You also need to protect the module from moisture, and if you remove the module from the TV for a long time, make sure that its connector does not become clogged.

Despite the complexity of the initial setup, CAM modules are an ideal alternative satellite receivers. Thanks to their simple design, they are more reliable than a receiver, they do not need an outlet, a remote control and do not take up space.

Important! Since Tricolor and NTV+ use different encodings (NTV+ uses Viaccess, and Tricolor DRE-crypt), therefore, NTV modules do not fit Tricolor cards and vice versa.

Channels can be configured in several ways:

You can use the operator's channel settings; to do this, you need to go to the parameters (settings) of the CAM CI module in the menu of your TV. Select “Update channel list” and then follow the on-screen prompts. Sometimes the TV itself may offer to use the operator’s profile to configure channels. Thanks to this search, we will get a proprietary channel sorting - News, Cinema, Sports, Everything, etc.

Or use a manual channel search (on some models this is the only way to configure channels).

For us, there should be a number - 10750 in the upper and lower ranges (sometimes there is only one line in the settings). Also check the name of the satellite - Eutelsat 36/Express-AMU.

Now you can start searching for channels, let's look at an example on an LG TV.

We go to the item “ Manual setting” (sometimes this item is inactive, then you need to start an auto search and stop it immediately). Select the transponder frequency (if it doesn’t exist, you just need to create it). The frequency is 11881 and we start the search.

Now the same frequency, but with the “Search for network” checkbox active. This is how our TV will find all channels.

On Samsung TVs, you first need to delete channels following this path:

“Menu” - “Broadcast” - “Change channel”, then in the window that opens in the lower left corner, select “Select all” and then “Delete”. Afterwards we need to return to the “Broadcast” submenu and select “Channel Settings” - “Manual Settings”.

On Sony TVs, searching and editing the transponder can be done through auto search along this path:

“Home” - “Settings” - “Digital configuration” - “Satellite auto-tuning”. The “Antenna Configuration” item should be “Fixed Antenna”.

Let's continue:

“Next” - “Reset satellite settings” - then we repeat - “Digital configuration” - “Satellite auto-tuning” - “Antenna configuration” - “Next” - “Select scan type” (we need “Network scanning”, “All” channels, “All stations”)

Let's continue:

“Next” - “Satellite 1” - “LNB configuration (lower and upper bands - 10750).

Afterwards you need to go back using the “Back/Return” button and go to the “Transponder” item where we can set the frequency to 11881.

Then go back twice using the “Back/Return” button and press “start”.

Tricolor TV is a company offering high quality television broadcasts. However, setting up the equipment to function properly can be challenging. The digital technology market is very large, and each manufacturer brings something of its own both to receiver models and to the TVs themselves. On most devices, setup is automatic, while others require a more “personal” approach. LG TVs belong to the second group.

Why LG's setup is different

In 2017, many companies changed their broadcasting conditions - a distinction was introduced between channels, which they now decided to sort in lists. This affected users in such a way that the list of offered Tricolor TV channels simply did not appear in the system, or appeared out of order/incomplete. LG TVs were especially susceptible to this problem, whose software turned out to be unable to support the new order.

Difficulties arose mainly in cases where users tried to search for channels using the “Quick Search” option. In this case, LG TVs did not perceive the signal decoding algorithms correctly, for which the company apologized more than once. Almost all of the company’s product lines for 2014-2018 were affected, and some still demonstrate this problem.

LG is actively developing new software that would support the formation of such lists that Tricolor TV uses. Its launch is tentatively scheduled for July 2018. However, this does not mean at all that Tricolor TV subscribers who have LG TVs at home should refrain from watching TV programs, since there is a way to get around the problem yourself - and it lies in a slightly different sequence of settings.

In addition, most LG TVs were equipped with a CAM module, which replaces the standard receiver - the connection and its configuration are somewhat different from the usual algorithm.

How to set up channels

Important! Everything below works on TVs running webOS.

Installation of the equipment must be carried out according to the instructions of Tricolor TV - installation of the antenna and dish, laying of cables. The company offers customers a full set of necessary devices to properly “dock” with a satellite and receive a signal.

One of the main steps is installing the CI+Cam module. In this case, the TV must remain turned off. It should be turned on after correct installation. The screen should display information about the equipment - about the card and the module itself.

Important! In some cases, at this stage, error No. 17 may occur, which indicates that the equipment was connected incorrectly, or the subscriber forgot to register with Tricolor TV with card data.

After all these preparations, the channels are configured like this (manually):

You need to go to the menu where you should find the “Advanced settings” item.
Select "Channels".
Select “Search for channels and settings.”
You should select the “Auto search” option, despite the fact that you are setting everything up manually. Here you can enter unique settings for Tricolor.
The search mode should be set to “Satellite”. If not, select it from the list.
Choosing a satellite TV operator is also an important option. For Tricolor today you need to click on “Other operators”.
Exit auto search - click on the cross, or press EXIT on the remote control. If you have version 3 or 3.5 of the LG axis and a Magic remote control, you should press and hold the Back/Exit button.

After this, you can start manually searching for channels.

Re-enter “Channel search and settings” through the advanced options menu.
Click "Manual Search" and make sure the reception mode is set to "Satellite". If not, change it to this mode.
Open the “Transponder” settings item and select ANY from the list, avoiding the number 12226/L/27500.
After that, click "Transponder" again.
Now select the option 12226/L/27500, and check if the “Add” button appears on the side.
Turn on “Network Search” - click on this item and change the value to “On.”
Click the "Add" option you found earlier. Wait until the end of the search and press EXIT.

Important! In some software versions, “Update” will appear instead of “Add”.

After this, the search for channels on the network will begin - during the search, the LG TV will check 22 transponders, and the result of such a check should be more than 300 channels, including radio and service arrays.

The list of channels will be formed in a special way due to the fact that new software has not yet been released for Tricolor TV. It will contain:

Provide digital and satellite services and radio channels;
The channel order is mixed up.

However, the list editor will be available, and you can easily select and mark those that the TV should skip from now on. The “Skip” function will help you hide them from the general list to make navigation easier.