How to clean the rear camera on iPhone 5s. How to remove dust from your iPhone camera

Six months ago, I noticed a problem in pictures taken on my iPhone. Different photographs were marked with a spot in the same place in the frame. Having carefully examined the glass above the microscopic camera lens, I found a small speck of dust and removed it by tapping the body with my hand.

After some time, there was so much dust that it became physically impossible to take normal pictures. I turned to a specialized service to not only fix the problem itself, but also to find its underlying cause. As it turned out, the matter could not be limited to simply cleaning the glass. Over the past year, a lot of dirt has accumulated inside, and your situation is most likely no different from mine for the better! You just don't know about it yet.

For answers to my questions, I turned to the MacPlus.ru service. The guys were invited to their workshop to show and tell where the dust inside the case comes from and how to properly remove it. Homemade tools are not suitable for this at all. Neither cotton swabs, nor, especially, a vacuum cleaner pipe will lead to the best results. Before this, I gave my smartphone twice to “home-grown” craftsmen, and each time after that the dust appeared again, literally after a few days.

A master named Alexander began the process methodically: this is not the first time they have had a device with such a problem, not the tenth, or even the fiftieth. Not much changes from generation to generation of Apple smartphones: the iPhone was never completely sealed, and therefore the pristine purity of its internal components is only a temporary phenomenon.

We're dealing with an iPhone 5, which means the disassembly process starts with unscrewing the bolts next to the Lightning port. These microscopic screws are as easy to lose as it is difficult to find an ordinary screwdriver for them. By the way, we are dealing with the standard , and its special variety TS1. To do this you will have to purchase a special tool.

But then comes an important point that allows you to distinguish a real professional from a “home-grown” expert who learned on roller skates with YouTube. Under no circumstances should the display be disconnected from the main part using a suction cup. Careless use of force leads to the detachment of glass from the display module, which turns the entire “sandwich” into an unusable set of hardware. If one day after repairs you notice that streaks or tiny bubbles have appeared under the glass above the screen, you are faced with the work of an amateur.

We lift the screen module and see an extremely sad picture. I've been using my smartphone for a little over a year, but I've never placed it in dusty places, hidden it under a dusty pillow, or kept it in my jeans pocket for long periods of time. But somehow the dust has accumulated, and it’s not just a lot of it. If I were the master, I would have grinned, but, as it turned out, all this is an absolutely ordinary picture. The only difference is that someone is lucky and the dust does not get on the glass above the camera module longer.

To assess the full extent of dust contamination, the electromagnetic protection is removed from the iPhone 5 motherboard. It also partially stopped the spread of particles. As luck would have it, the outbreak fell on the camera, and it didn’t just happen.

According to the technician, the problem could have appeared after the smartphone fell onto a hard surface. In such cases, the relative tightness of the rim around the screen could be compromised. And slowly, particle by particle, the entire upper, inner part of the body was filled with dust. So why did previous calls to other service companies not bring the desired results? It's just that the cleaning was most likely done manually.

All bolts and elements of the smartphone are placed in a tray with cells. Losing any of the spare parts is disadvantageous, first of all, for the mechanic himself: a second such spare part is not always available. God forbid you lose any of this at home, not to mention damage to some cable. And there are a lot of trains here.

Having removed all loose elements, Alexander takes a powerful air blower powered by a compressor. Without such a thing, it is almost impossible to get rid of dust in the case. By intelligently adjusting the air flow, you can remove all the dirt from sensitive electronic components without damaging any of them. The process takes almost a minute. Immediately after this, the smartphone looks like new - compared to what it was before. But we're not done yet.

Since dust has probably gotten on the optics in the camera, you will have to carefully clean them too, and at the same time go over the glass inside with a cotton swab. Pay attention to the size of the flash: its power, sufficient to illuminate dark rooms as a flashlight, does not in any way correlate with the microscopic size of the module. And there is also a lot of dust on it. Time self made, and very careful.

After walking with a cotton swab along the inner wall of the back of the case, the master begins assembling the smartphone. The parts fit into place in the reverse order, carefully and without haste. Trembling hands are the most terrible enemy in this matter. Calmness during this process makes the difference between a barely noticeable “click” of an inserted cable and a broken pad.

The iPhone was dirty and dusty. It became clean. The whole thing took about 5 minutes. The remaining fifteen I looked at the “insides” of the device. Say what you like, but only Apple knows how to make hardware as well as the design of the case. Black motherboard, strictly located main chips, incredible density of components per millimeter. Alexander also agrees: other manufacturers almost always ignore everything that is not visible to the average user. It is for this attention to detail that we love the products of the Apple company.

It all started with two bolts, and it all ends with two bolts. The screws are put into place, the smartphone is turned on and the camera is checked. In principle, this is not necessary. Just look at the camera again and see the huge difference.

Dust gradually accumulates on the camera of the iPhone 5, like other smartphones, as a result of which the quality of photos deteriorates. Therefore, the question arises: how to clean the camera on iPhone 5? The procedure is not the most complicated, but quite painstaking. The main difficulty lies in the need to completely disassemble the device. Without the appropriate experience and suitable tools, it is better not to do this yourself, but to entrust the work to professionals. The design of the iPhone 5 involves a lot of small parts inside the device. Moreover, if disassembled carelessly, there is a high risk of damage to the display module cables and the screen itself.

Typically, the need to clean the camera occurs quite rarely, especially if the gadget is in a case and used carefully.

However, small dust particles often end up inside the device. They can accumulate in absolutely different places, including the glass of the camera. After a certain time, they will become quite noticeable, including in the quality of the images. Typically, signs of contamination include the appearance of extra elements, spots, purple dots and other defects in photographs. This indicates the need for cleaning, and preferably not at home, since the situation can only worsen.

How to clean the camera on iPhone 5

There is little you can do on your own. Naturally, a vacuum cleaner and other improvised means cannot eliminate the problem. The case is tightly closed, although not airtight, so it is impossible to remove dust in any way without disassembling it. You can disassemble the gadget at home. To do this, you will need a set of screwdrivers, a plastic spatula or pick, tweezers and a silicone suction cup. But, due to the complexity of the design, it will not be possible to disassemble the gadget without damaging the internal components without the appropriate skills. The slightest damage can cause serious problems, which will lead to the need for expensive repairs.

If you are able to disassemble the smartphone yourself, you can clean it yourself. Carefully disassemble the device, and once you reach the camera glass, clean it thoroughly with a lint-free cloth. You can also use simple tape to remove dust particles. It is recommended to work in a clean room where there is practically no dust, otherwise the glass may become even more dirty. You can check the quality of cleaning in the light. At the end of the procedure, reassemble the smartphone in reverse order.

Sometimes image defects can be caused by a breakdown of the camera itself, which requires its replacement. You can buy a new camera module from the GSM-Forsage company. The company's assortment also includes all kinds of other spare parts for the iPhone, as well as any phones, smartphones, tablets from other manufacturers.

A professional answer to a pressing question.

At some point, iPhones, due to their compactness and mobility, replaced cameras for many. With each new generation of iPhone, the quality of shooting on Apple smartphones is constantly growing, approaching SLR cameras. However, it often happens that iPhone photos suddenly become insufficiently clear or blurry. Even setting the focus manually, it is not possible to achieve the same clarity. What to do?

Why does the iPhone camera become cloudy and stop focusing and what to do about it

1. The first and simplest reason is a dirty camera lens. In this case, everything is elementary - clean the camera lens. A dirty or dirty camera glass can interfere with focusing! We do this with a special cloth for wiping the lens.

2. True, in most cases, rags remain powerless. Dust and dirt can get into the iPhone body and accumulate between the lens and the protective glass of the camera. In this case, you cannot do without disassembling the phone. Note that most often the problem occurs on the iPhone 5, iPhone 5s and iPhone SE - the most popular iPhone models in Russia. Conclusion - we turn to specialists, or we disassemble the iPhone ourselves with the help of ours and carry out cleaning.

3. Scratches on the camera glass also rarely interfere with focusing. Scratches also greatly scatter and blur the focus and the picture as a whole. Here it is necessary to replace the lens glass in service center! The problem often appears on iPhone 6/6 Plus and newer ones, since on these models the camera protrudes from the body, often coming into contact with various, including sharp, objects.

4. The saddest reason why pictures on an iPhone turn out blurry is that dust gets on the lens matrix or the zoom of the camera itself is damaged. There is only one solution to these problems - replacing the camera in the service!

During use, the iPhone will inevitably become dirty. Dust, dirt, small particles, grease and other contaminants settle outside and inside the device. Contamination can lead to deterioration in the performance of the device and even to its failure. To prevent negative consequences from dust or dirt, you need to periodically clean your smartphone.

Which parts are susceptible to contamination?

The following external parts are most susceptible to this:

screen;
side edges;
back panel;
camera lens;
button surface.

These parts are characterized by stains from fingers, settling of grease and dirt. The problem is partially solved by a special cover or film. But at the same time, contaminants often penetrate under protective accessories.

Internal parts may also be damaged:

speaker membrane;
connectors;
SIM card tray;
camera lens;
microphone.

What problems can happen to your phone if you don't clean it?

The entry of various particles under the camera lens leads to deterioration in the quality of photographs, defocus and the appearance of spots. Contamination of the speaker membrane can lead to a decrease in volume, the appearance of extraneous sounds and hoarseness. If dust or other particles get into the connectors, they may break. If dirt gets into the microphone, it will degrade the quality and volume of the transmitted sound.

Also, if dust accumulates inside the case and gets on the processor, the device may overheat, which will lead to reboots, shutdowns and breakdowns. External contamination can cause the button to play, reduce its aesthetic appeal, and make the device more slippery in your hands.

How and what can you clean yourself?

To clean it yourself Apple iPhone As a rule, improvised means are used. Among these means:

cotton buds;
cotton pads;
toothbrushes;
toothpicks;
alcohol;
vacuum cleaner;
air under pressure, etc.

Not all of these remedies are harmless to iPhone. If handled incorrectly, internal parts may be damaged and appearance apparatus. It is recommended to remove only surface contamination yourself: wipe the body, camera lens, screen, and also carefully clean the connectors. For complete and safe cleaning, contact a specialist.

The Total Apple service center, located in the center of Moscow, offers safe and effective iPhone cleaning services. The procedure is performed by specialists using special products, which will allow cleaning of any type of contaminant within 30 minutes.

Instructions for external and internal cleaning of the camera on the iPhone.

Navigation

Today, every modern phone, smartphone or tablet is equipped with a video camera so that a person can capture or videotape any episode of his life at any time. Most of the current devices are equipped with two cameras: rear (on the back of the case) and front (in front above the display).

Many new smartphone models are capable of capturing excellent photos and videos with image quality comparable to professional digital cameras. This is especially true for the popular line of Apple smartphones. iPhone.

However, at some point, the user of a device with an excellent camera may notice that the pictures begin to turn out fuzzy or completely blurry. In most cases, this problem is explained by dust on the lens or other type of contamination. This is facilitated by carrying a smartphone in pockets, bags, backpacks, and simply untidy handling of it.

In our article we will tell you how to clean the front and rear cameras on smartphones iPhone and what means are recommended to do this.

How to clean the back/front camera on iPhone?

The usual process of cleaning the camera without disassembling the smartphone is no more difficult than the process of cleaning the display from fingerprints. The most important thing in this matter is to choose the appropriate cleaning materials. An alcohol hand wipe is perfect for this purpose, but it may simply not be in your arsenal at the right time.
In this case, it can be replaced by an ordinary clean napkin or any other piece of soft cloth. The most important rule is not to use wet, well-wrung out rags or sponges. It is also important that the fabric is free of lint, which can remain on the lens and spoil the quality of the pictures.

Another convenient tool for cleaning your camera from dust and other contaminants are cotton swabs, which are filled with cosmetic bags and handbags of almost all representatives of the fair sex. A dry stick will not bring the desired result, so you must first moisten it with some liquid, like cologne or glass cleaner, and then squeeze it out thoroughly.
If the stick is too wet, streaks may remain on the camera lens or, even worse, drops of liquid will seep under the lens and interfere with the operation of your device.

IMPORTANT: Refrain from cleaning the camera with any hard types of cloth, toilet paper and all other dry types of materials. A hard surface or invisible objects contained on it can cause irreparable damage to the protective glass of the camera, leaving scratches on it.

How to clean the rear/front camera on an iPhone: disassembling the device

In some cases, an attempt to clean the outside of the camera and thus return the image to its former clarity may fail. The essence of the problem is that dust and other dirt gets underneath the lens and clogs the lens from the inside. New smartphones such as iPhone 6, 6S, 7 And 8 are protected from dust and water, but for older models it seems iPhone 4, 4S, 5 And 5S The problem with a lens contaminated from the inside still remains relevant. In this case, it can only be cleaned by disassembling the device.
If for most smartphones you can remove the back panel without much difficulty and the presence of third-party tools, then with smartphones from the company Apple such a trick will not work. Owners of Apple gadgets know that smartphones from the line iPhone The back cover is not removable and this is due to the company's policy. In fact, remove the lid on any iPhone it is possible, but if you do not understand electronics and especially smartphones, then the best solution for you would be to contact the service Apple for device cleaning services.

If you do not intend to spend extra money for cleaning services, you can remove back cover iPhone by unscrewing the two small screws that are located on either side of the power connector. Since the screws are very small, you cannot remove them with a regular Phillips screwdriver. You will need a special screwdriver for 0.8 , which can be purchased at any electronics store for a very small price (about 100 rubles). If you are too lazy to go for a screwdriver and you are not afraid of scratching the case, then you can use the blade of a paper knife instead.
You will also need a suction cup for removing the screen, a spatula for removing the case (a plastic card or mediator will do), cotton swabs for cleaning the camera and special plastic tweezers for working with small parts of the device. Of course, you can use an ordinary metal one instead, but it can damage the “insides” of your iPhone.

IMPORTANT: The article provides an example of disassembling devices iPhone 5 And 5s. If you are the owner iPhone 4 or 4S, then the principle of disassembling these models is similar to the disassembly of fifth iPhones. If you are the owner of newer models ( iPhone 6, 6s, 7 etc.), we strongly recommend that you do not disassemble them yourself, but take them to a service center Apple in case you start having problems with the cameras. These models are perfectly protected from the penetration of dust and other dirt under the camera lens.

Step-by-step instructions for disassembling iPhone 5 and 5S

So, after you have acquired the necessary set of tools, you will need to perform the following steps:

Step 1.

Turn off your iPhone and use a screwdriver to remove the two mounting bolts from the bottom of the housing.

IMPORTANT: Be careful not to lose the bolts as they are extremely small.

Step 2.

Glue the pre-prepared suction cup to the bottom of the screen, as shown in the photo below, then pull it up and use a spatula to carefully move around the entire perimeter of the screen, snapping it away from the body.

Step 3.

If you are the owner iPhone 5, the screen will immediately rise as soon as you disconnect it from the case.
If you are the owner iPhone 5S, then you will additionally need to disconnect the cable that connects the screen and the body. To do this, you need to unclip the piece of iron under which the cable goes, and then remove it from the connector.
By lifting the screen, you will gain access to the “insides” of your iPhone. You will need to unscrew the protective plate and remove the cables from the connectors located under it, and then completely disconnect the screen from the case.

In the same corner as the previously unscrewed plate, the rear camera itself is located. Lift it up and use slightly damp cotton swabs to thoroughly clean the lens and protective glass. It is best to use alcohol-containing liquids to wet the sticks.

Step 4.

After cleaning the rear camera, set the body aside and pick up the part with the screen. To get to front camera, You need to unscrew another protective plate secured with two bolts. Under no circumstances unscrew the third bolt located next to the required two.

Step 5.

As soon as you disconnect the plate, the audio speaker will be removed along with it, which can be put aside for now.
In the upper left corner, under the factory tape, there is a front (front) camera, which can be reached by peeling off a small section of the factory tape.
As with the rear camera, clean the lens and protective glass with cotton swabs, replace the camera itself and put the factory tape back the way it was.

The cells are clean. Now you need to perform all the above steps in reverse order.

IMPORTANT: Remember that opening the iPhone case yourself will void the warranty on it. All material contained in the article is presented for informational purposes only. If you intend to try it in practice, you act at your own peril and risk. The site administration is not responsible for your actions. Also, during the process of disassembling and assembling the iPhone, we strongly recommend that you follow the video instructions presented below.