Setting up a satellite dish for a tricolor Samsung TV. Self-configuration of the CI module on LG, Samsung, Philips and Sony TVs

Setting up and connecting the Cam module
Tricolor TV

Currently, many modern TVs are equipped with built-in satellite tuner and a connector for the Cam module, which allows you to view TV channels from satellite operators. To view channels satellite operator Tricolor TV, it is advisable that your TV supports HD AVC broadcast standards (MPEG-4 H.264), which will allow you to view programs as in high quality HD and SD formats.

To connect the Tricolor TV Cam module to a TV, you need to purchase the following equipment:
1. Cam-module Tricolor TV;
2. Smart card (included with Cam module and one-year subscription);
3. Satellite dish;
4. Circular polarization converter;
5. RG-6 cable (or analogue) for connecting the satellite dish to the TV.
Next, you need to install and configure the satellite antenna for broadcast programs from the satellite operator Tricolor TV (Eutelsat W4/W7 36.0`E) and use a television cable and F-connectors to connect it to the plug of your TV marked “SATTELITE”.
You can set up a satellite dish yourself, but for high-quality broadcasting it is better to contact specialists.

We carry out subsequent work on setting up the Tricolor TV Cam module directly with the TV:
1. Insert the smart card into the Cam module until it stops (according to the instructions on the sticker);
2. Insert the module into the TV connector;
We perform the first two points with the TV turned off!!!
3. Using the remote control, you need to reset the TV settings to factory settings. To do this, press the “menu” button and select: - “support” - “self-diagnosis” - “reset”, press the “OK” button, after which the TV will reboot;
4. After the reboot is complete, press the “menu” button, then select the “channel” --- “antenna” menu item and select the “satellite” submenu.

5. In the “channel” menu, go down to the submenu “ satellite system" and click "OK";
6. A window will appear asking for a PIN code, where we enter the values ​​- 0000 (by default), a list of satellites will appear, where you need to uncheck all the boxes next to the list of satellites, except for the satellite with the designation - Eutelsat W4/W7 36E (if you cannot uncheck the boxes marked satellites: remove the module from the TV and reset the TV settings again);
7. Go to the “satellite selection” menu and select the satellite - Eutelsat W4/W7 36E.

And in the LNB settings we indicate the following data:
Transponder - 12226 H
Lower gen. LNB - 0
Top gen. LNB - 10750;

8. Then go to the “manual settings” menu, look for transponder 12226 H and press the “search” button;

9. After scanning Tricolor TV satellite channels, press the “save” button.

This completes the setup of the CAM - Tricolor TV module, let's enjoy watching TV shows!!!
This material was reviewed on a Samsung TV; connecting and setting up the Cam - Tricolor TV module on TV models from other manufacturers is carried out in a similar way.

To connect satellite or cable television you need special equipment: a receiver and a smart card that will convert the incoming signal from the provider to the TV. But, if the TV has a CI connector, then you can do without a receiver. You can install the module itself with a smart card in CI, and the signal decoding function will be performed through it. In this article we will look at setting up the CI Tricolor module on an LG TV and how to correctly install the CAM module.

The concepts of CI and CAM module are often confused or perceived as synonymous. CI (stands for Common Interface) is the connector into which the CAM module is inserted. A CAM module (Conditional Access Module) is an electronic device that performs the function of an adapter or adapter. A smart card is installed in it, through which encrypted channels will be transmitted to the subscriber's receiver.

The CAM device must be selected depending on the encoding of the service provider. For example, to configure Tricolor, you will need the DRECrypt module. There are digital television broadcasting standards:

• DVB-T and DVB-T2 - terrestrial TV;
• DVB-C - cable TV;
• DVB-S and DVB-S2 - satellite TV.

CI can support either a specific standard or several. It all depends on the model of the TV receiver. If you are interested in satellite broadcasting, be sure to make sure that the built-in tuner on your TV supports it. Now a little about the advantages and disadvantages of the CAM module in relation to the receiver.

Among the advantages can be noted:

• High transmission speed, since data processing occurs wirelessly, directly on the TV;
• Possibility of transmitting maximum image quality;
• No need for an additional remote control;
• Longer service life;
• Lower cost.

The disadvantages include the following:

• It is not possible to view the TV channel program;
• The functionality and interface are more limited compared to the set-top box;
• There is no ability to show a large list of channels;
• The setup is more complicated (however, on LG TVs, when you select an operator, the corresponding channels are automatically selected).

What is included

The Tricolor TV company provides a choice of several sets of equipment for smart and regular TVs. Most include receivers, but some also have a CAM module. This set includes:

• Tricolor CAM module, compatible with television receivers that support the satellite standard digital television DVB-S2;
• Tricolor smart card for TV;
• Satellite dish;
• Satellite circular converter.

It is not necessary to take a ready-made set of equipment. It is important to purchase only a smart card from the selected service provider and enter into an appropriate agreement. Next, we’ll look at what requirements apply to the equipment for connecting the CAM module itself to the TV, as well as how to set up Tricolor television on LG.

equipment requirements

The first thing that a Tricolor user must configure is an antenna that must pick up the frequencies of one of the satellites: Eutelsat 36B, Express-AMU1, Express AT1. Then you won't have to post special settings CI slot: everything will happen in automatic mode.

One more caveat: the slot must be CI+. This is a new version of the CI connector with reverse encryption. That is, all information will be encoded before being sent to the screen. This allows the provider to protect their data from copying. Now not all content can be recorded from such a device, but only that which will be allowed for recording. The TV must have an LNB IN port, which indicates the presence of CI+ technology.

The TV must be equipped with a built-in digital tuner that supports the DVB-S2 satellite broadcasting standard. It is also desirable that the TV receiver supports 4K UHD (Ultra High Definition Television) and HEVC (High Efficiency Video Coding format). If such formats are not supported, channels broadcasting in the specified quality will not be available.

The CAM module must match the smart card encoding. The device is connected to the TV in the usual way: inserted into the CI connector. If the TV suddenly stops seeing the smart card, you need to check that the module and slot are connected correctly. After connecting to the connector, the access rights check will begin.

Sometimes the message about checking access rights can hang for a long time. To eliminate this, the time settings on the TV must be set to automatic mode. You can also try resetting the CAM module settings to factory defaults.

The built-in tuner provides certain advantages over the receiver: there is no need to purchase a separate device, which will take up additional space.

Connecting and setting up the CI Tricolor module on an LG TV

Now let's take a closer look at how to connect and how to configure the Tricolor module on LG TVs:

• The TV must be turned off before installation;
• You need to insert the Tricolor card into the CAM module all the way with the contacts facing up, and the CAM module into the CI slot on the television receiver. The antenna cable must also be connected;
• Turn on the TV and look at the information on the screen. An error message may appear. The card or module may not be inserted all the way. You need to check the physical connection. To make sure that the TV sees your device, it is better to go to the CI (CAM) menu, where this information will be displayed;
• Now you need to go to the settings menu. Find the items there " Fast" And " Channels»;
• In channel tuning mode, select “ Satellite" and press " Further»;
• Set the operator "Tricolor". The satellite must match one of the service provider's satellites. The settings are set automatically. The only thing you can check is the signal quality, which should be at least 70%. Its adjustment is carried out by adjusting the antenna and checking the connection of the cable and all other components;
• Now you can start connecting channels. To do this, you need to go to the channel settings and perform an automatic search. How newer version software, the more complete the final list will be. After the search is completed, the list is saved;
• If everything went well and you can open channels, you will also need to configure the sound for older software firmware. To do this you need to find " Setting up digital TV sound" and select " mpeg" This problem has been fixed in the latest firmware versions;
• Now you need to perform a factory reset by selecting " CI data" This is necessary so that there is no message later that the access rights check failed. After this, disconnect the TV from the power supply. This completes the CI setup.

If the automatic channel search does not give satisfactory results, you can perform manual tuning. To do this, you need to select a satellite and set its transponder frequencies to 12,111 MHz or 11,881 MHz, as well as horizontal polarization. When searching manually, be sure to check the box “ Network search».

On LG TVsthe default option is automatic search channels. It must be turned off, otherwise the channels you found will be reset.

After all operations, the TV turns on again and remains on for up to 8 hours. This is necessary to obtain service activation keys. In the CI data (CAM) menu you can find information about the smart card: identification number, connected packages and their expiration date.

Another important point is updating the module software. Detailed instructions can be found on the Tricolor website www.tricolor.tv. Do not forget about timely updating of the version, since software products that are too old do not perform all available functions or may refuse to work correctly.

The current version of the module software can be found in the settings: “ Information» -> « Module» -> « Software version» (item names may vary depending on the device model). To perform the update, you need to do the following:

• In the module settings, you should set the current status of pop-up windows to “ Activated" or " Included»;

The CAM module or conditional access module is designed for viewing encrypted satellite or cable channels. It is inserted into the CI slot of the TV or receiver and decodes channels intended for paid viewing. Some receivers, for example Skyway Classic 4, have two CI+ slots, which allows you to simultaneously watch paid channels from two different operators (for example Tricolor and NTV+). Today, many TVs are equipped with a tuner for receiving satellite signals and have a slot for a CAM module. However, to view encrypted channels of Tricolor and NTV+ operators, the tuner and slot must meet the following characteristics: the tuner must support the DVB-S2 format, and the slot must support the CI+ format. Although most TV brands meet these requirements, you should carefully study the specifications before purchasing.

Since modules are a fairly new development, many people find it difficult to initial setup and operation of CAM modules.

I would like to start with the fact that installing modules on TVs different manufacturers, varies and sometimes very seriously. LG proved to be the simplest and most loyal to the module. Here you just need to insert the module into the TV. Select a satellite dish in the menu and search for channels of a specific operator (Tricolor or NTV) and it will automatically and correctly find the channels of the selected operator.

But the most problematic from a setup point of view are Sony and Thomson TVs. You need to manually add the name of the satellite to them (remember that the satellite of the NTV-Plus and Tricolor operators is called Eutelsat W4 or Eutelsat 36E), as well as add transponder parameters (frequencies: 12226 for Tricolor and 12322 for NTV+) and converter local oscillator frequencies for both operators: upper and lower frequency - 10750. Then you need to select “network search”, and the TV will find all the channels of this operator. If there is no “network search” item in the menu, then all transponders will have to be added manually. A complete list of transponders is available on the operator’s website.

Now let's look at the most common problems and errors when working with the CAM module. The first and most common problem occurs when the TV initially initializes the module. When this happens, the TV sees the module, all information about the module and card is displayed in the menu, however, when the channel is turned on, it writes an error (the error code and explanation are different for different brands and TV models). In such a situation, you need to act as follows: turn off and turn on the TV. After turning on the TV, checking access rights between the TV and the module will begin again. In most cases, this method is more than effective. However, in some cases, for example, after a power surge or a sudden power outage, the settings of the module itself may be lost. Then the access rights check will not be carried out until the CAM module settings are reset to factory settings through the TV menu.

Now regarding the problems associated with the software of modules and televisions. Problems with modules not working correctly are usually found on early model TVs. But, fortunately, these problems can often be eliminated by installing the latest software for your TV. As for the module software update, it occurs only from the satellite. In NTV+ modules, the update can be turned on forcibly by simply selecting the required item in the menu. In Tricolor-TV access modules, satellite updates are broadcast for a limited amount of time (1-2 months), if during this time you have not managed to update the software, you will have to wait for the next one.

Despite the simplicity of the design, the CAM module cannot be bent or disassembled, and it is especially not recommended to reprogram the module, with the exception of the official operator software. You also need to protect the module from moisture, and if you remove the module from the TV for a long time, make sure that its connector does not become clogged.

Despite the complexity of the initial setup, CAM modules are an ideal alternative satellite receivers. Thanks to their simple design, they are more reliable than a receiver, they do not need an outlet, a remote control and do not take up space.

Important! Since Tricolor and NTV+ use different encodings (NTV+ uses Viaccess, and Tricolor DRE-crypt), therefore, NTV modules do not fit Tricolor cards and vice versa.

We would like to draw your attention to the fact that guaranteed viewing of all channels is possible only if the receiver has latest version module software. Current version Software - 1.2.0 (for new modules 1.0.0).
To view the current version of your module’s software, you need to use the user manual to find the “CI Menu” item in the TV/receiver menu (or “CI Settings”, the name may differ depending on the TV/receiver model. Next, you need to follow the “Information” path - Module - Tricolor CI+ CAM". In the line "Software version" will be indicated installed version Module software.

To update the CI+ module software, you can contact our Tricolor TV dealership in Moscow.

Please note that to ensure correct operation of the module, the software version of your TV/receiver must be up to date. You can check the software version information on the official website or in the support service of the TV/receiver manufacturer.

To restore viewing, perform a manual channel search (with the network search function enabled):
- Step 1. To start manual network channel tuning, you need to switch your TV to satellite channel tuning mode. To do this, you need to go to the signal source (antenna) settings section in your TV menu.
- Step 2. Next in the setup menu you need to find the “Manual setup” section and go to it.
- Step 3. Before starting channel search, make sure the following parameters are set:
1) Network search option is enabled
2) The following parameters are used for searching:
- Frequency (transponder) - 12226 (H/L)
- Symbol rate - 27500
- Satellite - Eutelsat 36E
If necessary, enter these parameters manually.
- Step 4: Then start searching for channels and follow the instructions on your TV screen. During the search process, the TV should display information about the search progress and the channels found.
- Step 5: Once the process is complete, confirm saving the channel list (the prompt may not appear on some TV models).
Please note that some TV parameters may be missing or named differently (if necessary, you can check the information with the TV manufacturer’s support service).

We will also consider CAM setup Tricolor TV module using the example of an LG TV:

In the Menu Advanced settings - Channels, select Search for channels and settings.

Auto search.

Specify the channel search mode - Satellite.

Select the Other Operators option (To delete all previously existing channels)

Select the Tricolor TV option

Go back a few steps or press the EXIT button several times.

Go to the main menu: Advanced settings - Channels - Channel search and settings.

In the Channel search menu, select Manual search.

Attention! Check the reception mode: it must be set to Satellite!

Select the Transponder menu item, in the drop-down menu select absolutely any frequency (!except!) 12226/L/27500

Click on the Transponder menu item again and now select 12226/L/27500 (Check that the UPDATE or ADD button is available but do not click on it!)

Select the menu item Network Search and click on the On option.

Press the UPDATE or ADD button, the search for channels on the network will begin.

Your LG must scan 22 transponders (about 300 channels, this figure includes TV and radio channels)

After scanning is completed, press the button on the remote control - EXIT to return to viewing.

You can also search by satellite. In this case, all channels that are available on the satellite specified in the settings will be saved.
If you are unable to search for channels on your own, you can always contact the support service of the TV manufacturer or the official Tricolor TV Dealer Center.

Modern TVs have long no longer needed to connect additional equipment and are able to receive and process a signal from a satellite without connecting a receiver. Now, in order to watch satellite television, it is enough to purchase the ci module offered by Tricolor.

This device allows you not to clutter up the apartment space with unnecessary equipment, leaving it as spacious and elegant as possible. At the same time, the quality of broadcasts remains at the highest level, even when it comes to Ultra HD channels. As a result, users receive maximum benefits from all possible angles. The only drawback of such devices is the unusual setup, which can cause difficulties for unprepared subscribers.

What is a Cam module

Those who have not yet encountered Tricolor TV modules should know that this device are a portable analogue of standard receivers, created specifically for smart TVs.

They are a small plate into which a smart card is inserted. It is this device that receives the signal from the satellite and decodes it to watch TV channels.

At the same time, those who want to buy a cam module will have to think in advance about whether the TV they are using is compatible with the new device. Additionally, you should clarify whether signal reception is supported in the subscriber’s region of residence. Official distributors of equipment or contact center consultants can provide this information.

General information about setting up the Tricolor TV cam module

Those who decide to do the setup themselves should know that, as is the case with most similar equipment, there are both universal devices and Tricolor cam modules that can only receive a signal from the mentioned provider. Professionals recommend purchasing equipment of the second type, since it is much easier to set up.

Additionally, you need to be aware of the differences associated with TV models. The procedure for connecting to satellite television on LG and Samsung TVs has several differences that need to be taken into account. Below we will talk about them in more detail.

Setting up the Tricolor ci module on a Samsung TV

Most modern technology is capable of setting up automatically. If it has not started, you will have to configure the Tricolor with the ci module for the Samsung TV manually. For this you will need:

1. on the start page select the satellite User Sat1;
2. then in the LNB section you will need to set the lower frequency limit, which must coincide with the upper one;
3. after which the user will have to switch to “channel settings”;
4. specify the satellite again and click “create” in the “transponder” line;
5. then you will need to indicate the frequencies and speed (they are present on the satellite company’s website and in the instructions for the module);
6. Having saved the specified parameters, the subscriber will only have to start the search.

For getting full list You will have to run the search again later. This completes the Samsung smart TV setup, and viewers get the opportunity to watch TV channels.

Setting up the ci Tricolor module on an LG TV

Preparing the Tricolor TV conditional access module for operation on LG will be a little easier. Those wishing to watch satellite television will have to:

1. on the start page, set the basic parameters, indicating the type of antenna (satellite), converter (single), satellite (Eutelsat), frequency 12226, power (on);
2. after saving the listed parameters, the user will be asked to check the signal level (reception quality must exceed 80%);
3. the next step is to switch to the TV channel search section and launch it in automatic mode;
4. then all you have to do is click the save button and configure the sound in the appropriate subsection (must be MPEG4);
5. The last step is to go to the start page and enter the activation code.

Sometimes, before entering the code, you need to reset the settings to factory levels. Otherwise, the equipment is ready for use and subscribers can already watch their favorite programs.

Problems and their solutions

Despite the simplicity of preparing the Tricolor Ultra HD cam module for operation, some users may encounter sudden problems. Usually they are caused by:

• incorrectly inserted smart card;
• equipment malfunction;
• errors of the users themselves;
• an incorrectly rotated antenna (the reception quality scale on the screen will be below 80%);
• inconsistency of the TV with modern requirements.

Clients of a satellite company are able to cope with almost every one of these troubles on their own. So, it is often enough to check the correct connection and repeat the setup procedure.

Sometimes you need to go to the module menu and reset the settings to the factory level.

In the most difficult situations, you will have to call the contact center consultants. But it is important to prepare information in advance that will allow them to recognize the caller. This includes passport data, connection address, service agreement number, smart card ID.